Maytag oven F01 / Sensors

Maytag oven
error code F01

Oven / display reference

Maytag lists the oven temperature sensor, the control or the wiring for F01 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

Also printed as F01

Last reviewed

Oven / display reference
Meaning
Maytag lists the oven temperature sensor, the control or the wiring for F01 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Who handles it
Reset, then book
Related codes
Source
F01- Error Code - Range - Product Help | Maytag

What Maytag oven F01 means.

What it means

Maytag lists the oven temperature sensor, the control or the wiring for F01 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F01 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F01: Close view of a cold oven's rear wall with the slim temperature probe mounted on a small bracket, the racks removed and the door open below.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Match the label on your appliance to the range list before you rely on the wording for F01.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Cut power at the breaker for a minute, restore it, then check for F01.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Give the oven a minute on screen after the reset; a returning F01 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Keep foil, pans and racks clear of the sensor area inside the range.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Write down the model and serial numbers and the exact F01 wording before you call.

Does F01 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The oven temperature sensor.

Conceptual Range / oven sectionTemperature sensorWiringControl123

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Open range oven with two racks and a thin metal temperature probe with a braided lead mounted on the rear wall

Component reference

Oven temperature sensor (F1-1, F1-2, F2)

On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.

Read the definition

A little more context.

How does the Maytag range page explain F01?

For F01 the range entry names the oven temperature sensor, the control or the wiring. Nothing in it says which of them has failed.

Read the supporting manual

Which first steps does Maytag give for F01?

Take the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F01 stays away, the reset did its job.

Read the supporting manual

How far apart are F01 and F02?

F02 and F01 name the same suspects in the range list; quote the code you actually see when booking.

Read the supporting manual

How careful should I be with the range while F01 is up?

Do not rely on the dial alone while this is open; a food thermometer is the safer guide. If F01 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F01- Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13737 / PH 13737 (range)

Manufacturer document

F01 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13738 / PH 13738 (range)

Manufacturer document

F01 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14397 / PH 14397 (wall oven)

Facts for F01 are from the range table (PH 13737) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say F01 means?

Maytag names the oven temperature sensor, the control or the wiring and gives no test to choose between them.

Can a breaker reset fix F01?

Yes, give it the whole minute. If F01 is still there afterward, schedule a visit.

What is on Maytag's list for F01?

Maytag names the oven temperature sensor, the control or the wiring. Which one failed is for a technician with a meter to decide.

What helps most on the first visit for F01?

Model and serial numbers plus a note of what happened when F01 appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.