What it means
Maytag's range page links F02 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven F02 / Sensors
Maytag's range page links F02 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F02
Maytag's range page links F02 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F02 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record F02 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for F02 again.

Give the oven a minute on screen after the reset; a returning F02 means schedule a visit.

Do not bend or poke the sensor inside the range; panel work belongs to a technician.
Note the model and the moment F02 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionMaytag's range page says F02 may come from the oven temperature sensor, the control or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F02 returns.
Read the supporting manualMaytag gives F01 and F02 the same wording on the range page, so the same first step fits both.
Read the supporting manualDo not rely on the dial alone while this is open; a food thermometer is the safer guide.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13739 / PH 13739 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14398 / PH 14398 (wall oven)
Facts for F02 are from the range table (PH 13739) of Maytag Product Help, checked November 2026; no model list is printed.
F02 is printed against the oven temperature sensor, the control or the wiring; the page does not narrow it down.
Try it first: one minute off, one minute on screen. If F02 persists, a technician should look.
The list is the oven temperature sensor, the control or the wiring; testing on site settles it.
The model number, what F02 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
Maytag lists the oven temperature sensor, the control or the wiring for F01 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.