What it means
F03 on a range means Maytag suspects the electronic oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven F03 / Control board
F03 on a range means Maytag suspects the electronic oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as F03
F03 on a range means Maytag suspects the electronic oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
F03 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record F03 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for F03 again.

Give the oven a minute on screen after the reset; a returning F03 means schedule a visit.

The control board lives behind panels on the range; keep them closed.
Keep the model number close and note when F03 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionF03 is printed against the electronic oven control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F03 returns.
Read the supporting manualRead the exact display: F02 means the oven temperature sensor, the control or the wiring on the range page, and F03 means the electronic oven control or the wiring.
Read the supporting manualIf the range behaves after the reset, using it is up to you; if F03 returns, stop and schedule a visit. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13740 / PH 13740 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14399 / PH 14399 (wall oven)
F03 comes from Maytag Product Help (PH 13740) for the range, read in November 2026; the F03 entry names no models.
Maytag names the electronic oven control or the wiring and gives no test to choose between them.
With F03 on the range, try it first: one minute off, one minute on screen. If the code persists, a technician should look.
Maytag names the electronic oven control or the wiring. Which one failed is for a technician with a meter to decide.
Model and serial numbers plus a note of what happened when F03 appeared.
Maytag codes, symptoms, parts and service
Maytag's range page links F02 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.