Read the whole display
Give the exact code and say whether the microwave is over-the-range or countertop.
Model-specific code library
We decode 53 microwave codes and messages: E, F and FC E codes, Wi-Fi and registration messages and display notes. Most are over-the-range; six are countertop.
Maytag prints AccuPop Fail as “The oven could not execute the function. There may a problem with the AccuPop Sensor.” Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Read the AccuPop Fail checks55 researched microwave codes. A message can mean something different on each Maytag model, so trust the manual that came with yours.
Maytag says the gas sensor reported a problem to the control board for E11; the problem may be the gas sensor or its wiring. Reset at the breaker for one minute and monitor for one minute. If E11 returns, book a technician.
Reset, then bookMaytag words E12 as “a problem with the Gas Sensor or the associated wiring.” Turn the breaker off for one minute and monitor for one minute. If E12 returns, schedule a technician.
Reset, then bookMaytag prints AccuPop Fail as “The oven could not execute the function. There may a problem with the AccuPop Sensor.” Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Reset, then bookThe Maytag page for Colon Flashing on a countertop microwave states “The colon, between the digits in the display, will flash when the time is set.” No reset is printed for it, so schedule a visit if it keeps appearing.
Information onlyD1:0 on a Maytag countertop microwave is explained as “D1: _ 0 or D1: _ 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.” No reset is printed for it, so schedule a visit if it keeps appearing.
Owner checks firstOn a countertop microwave, the entry for D1:1 says “D1: _ 0 or D1: _ 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.” Nothing else is printed, so schedule a visit if it repeats.
Owner checks firstMaytag's over-the-range microwave page words FCE1 like this: “The appliance could not connect to the router.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Reset, then bookThe Maytag page for FCE2 on a over-the-range microwave states “The appliance could not connect to the router.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Reset, then bookMaytag's over-the-range microwave page links E03 to the keypad (user interface) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Reset, then bookThe Maytag over-the-range microwave entry for F2 names the keypad (user interface) or the wiring. Reset first, then call us in if the code keeps coming back.
Reset, then bookMaytag says for E13: the oven did not pre-heat correctly, and the problem may be the appliance control board or the wiring. Reset at the breaker for one minute and monitor for one minute.
Reset, then bookF4E9 on your over-the-range microwave is tied by Maytag to the smart pop control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Reset, then bookMaytag's over-the-range microwave page links F2H1 to the vent fan and light switch (located on the lower left front side panel) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Reset, then bookMaytag lists the vent fan and light switch (located on the lower left front side panel) or the wiring for F2H2 on the over-the-range microwave. Reset the power first and watch the display; a returning the code is the cue to book us.
Reset, then bookFor a over-the-range microwave showing F7E9, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Reset, then bookMaytag’s F9Q page prints no cause, only the reset: breaker off for one minute, on again, monitor the oven for one minute. If F9Q returns, schedule a technician. F9Q1 and F9 do print causes.
Reset, then bookOn a countertop microwave, the entry for Flashing 0:00 says “A flashing '0:00' means there has been a power failure.” No reset is printed for it, so schedule a visit if it keeps appearing.
Owner checks firstThe Maytag page for Flashing ":" or PF in display on a over-the-range microwave states “There has been a power failure or the clock time has been turned off.” Nothing else is printed, so schedule a visit if it repeats.
Information only
We decode 53 microwave codes and messages: E, F and FC E codes, Wi-Fi and registration messages and display notes. Most are over-the-range; six are countertop.
Many microwave rows print a part name, a reset or a description and no cause. We say only what the page prints.
Give the exact code and say whether the microwave is over-the-range or countertop.
Do not open the cabinet. Leave anything beyond a reset to a technician.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Bubbles on the control panel of a Maytag countertop microwave are usually the clear protective film that ships over the panel. Lift one corner with a fingernail and peel it off; there may be more than one layer. If the panel still looks raised, book a technician.
Follow the guide for your own model, and see how we research these pages.
Many microwave rows print a part name, a reset or a description and no cause. We say only what the page prints.
Take a picture of the full microwave display and the model label. Say what the machine was in the middle of when the message came up, and do not lean on an explanation written for a different appliance.
An old search phrase is not proof from the manufacturer. If our microwave documents say nothing about a message, we still list it by name and send you toward help, without blaming any part.
Open any manufacturer document in this microwave library and check the model on its cover against the label on your machine. Another model has its own owner’s guide.