Maytag microwave Demo Mode / Display and signals

Maytag microwave
error code Demo Mode

Microwave / display referenceDemo Mode

Maytag's over-the-range microwave page words Demo Mode like this: “If demo mode was recently turned on or off 'dOn' or 'dOff' will show in the display.” Nothing else is printed, so schedule a visit if it repeats.

Also printed as Demo Mode

Last reviewed

Microwave / display referenceDemo Mode
Meaning
Maytag's over-the-range microwave page words Demo Mode like this: “If demo mode was recently turned on or off 'dOn' or 'dOff' will show in the display.” Nothing else is printed, so schedule a visit if it repeats.
Who handles it
Information only
Source
Demo Mode - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave Demo Mode means.

What it means

Maytag's over-the-range microwave page words Demo Mode like this: “If demo mode was recently turned on or off 'dOn' or 'dOff' will show in the display.” Nothing else is printed, so schedule a visit if it repeats.

What you can safely check

Microwaves keep a charge when unplugged, so the casing stays shut.

When to call a technician

Demo Mode repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag microwave Demo Mode: Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Microwaves keep a charge when unplugged, so the casing stays shut.

  2. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Check that your appliance is an over-the-range microwave and copy Demo Mode exactly as the display shows it.

  3. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Maytag prints no reset for Demo Mode, so record what the microwave does rather than guessing a fix.

  4. Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Keep the model number close and note when Demo Mode appeared and what the over-the-range microwave was doing.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Ask whether Demo Mode is a mode someone switched on; Maytag describes it as a setting.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Keep the model number close and note when Demo Mode appeared and what the over-the-range microwave was doing.

Does Demo Mode keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

How does the Maytag over-the-range microwave page explain Demo Mode?

Here is what Maytag prints for Demo Mode on an over-the-range microwave: “If demo mode was recently turned on or off 'dOn' or 'dOff' will show in the display.”

Read the supporting manual

What do I try at home first for Demo Mode?

Maytag's page for Demo Mode gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the microwave shows.

Read the supporting manual

How far apart are Demo Mode and AccuPop Fail?

The over-the-range microwave list prints AccuPop Fail next to Demo Mode, but with a different line. Look up the one on your display.

Read the supporting manual

Do I switch the over-the-range microwave off when Demo Mode comes up?

A setting is not a breakdown, so the over-the-range microwave is safe to use. If Demo Mode keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

Demo Mode - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2023-08-16; PH 10324 / PH 10324 (over-the-range microwave)

Scope for Demo Mode: Maytag over-the-range microwave, PH 10324, checked November 2026. Maytag lists no models on the Demo Mode page.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say Demo Mode means?

On the over-the-range microwave page the line is “If demo mode was recently turned on or off 'dOn' or 'dOff' will show in the display.” No further cause is given.

What does Maytag suggest for Demo Mode?

There is no reset on that page. Note what happens and book us if Demo Mode persists.

Is a specific part blamed for Demo Mode?

Maytag names no part here. Read the message and follow the steps.

What helps most on the first visit for Demo Mode?

The model number, what Demo Mode looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.