What it means
Maytag prints AccuPop Fail as “The oven could not execute the function. There may a problem with the AccuPop Sensor.” Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Maytag microwave AccuPop Fail / Information
Maytag prints AccuPop Fail as “The oven could not execute the function. There may a problem with the AccuPop Sensor.” Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Also printed as AccuPop Fail
Maytag prints AccuPop Fail as “The oven could not execute the function. There may a problem with the AccuPop Sensor.” Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.
AccuPop Fail returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

The message is about the AccuPop function. A plain timed run shows whether ordinary microwave heating still works.

Then back on.

Verify microwave operation, as the page says.

Tell us the brand of bag and whether you used the Popcorn key or AccuPop.
Do not open the microwave housing; sensors, boards and wiring sit behind high-voltage parts.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The oven could not execute the function, and there may be a problem with the AccuPop sensor. The page spells it “may a problem,” as printed.
Read the supporting manualF4E9 names the Smart Pop control or its wiring. AccuPop Fail names the AccuPop sensor.
Read the supporting manualF9Q1 also says the oven could not execute the function, but blames the user interface touch pad.
Read the supporting manualMaytag does not say. The message concerns the function that failed.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2023-08-16; PH 10323 / PH 10323 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10365 / PH 10365 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10370 / PH 10370 (over-the-range microwave)
Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10323, with the F4E9 and F9Q1 pages.
The page names an AccuPop sensor. Maytag does not describe it further here.
It appears under Other Error Codes in the Maytag tree.
The page gives no such cause.
It is the only step printed.
Maytag codes, symptoms, parts and service
On a countertop microwave, the entry for LOC says “A new 2-step door-opening feature has been added to some microwaves to help avoid unintended access.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.