Maytag microwave Flashing 0:00 / Power supply

Maytag microwave
error code Flashing 0:00

Microwave / display referenceFlashing 0:00

On a countertop microwave, the entry for Flashing 0:00 says “A flashing '0:00' means there has been a power failure.” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as Flashing 0:00

Last reviewed

Microwave / display referenceFlashing 0:00
Meaning
On a countertop microwave, the entry for Flashing 0:00 says “A flashing '0:00' means there has been a power failure.” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Owner checks first, then a technician
Related codes
Source
Flashing 0:00 - Error Code - Countertop Microwave - Product Help | Maytag

What Maytag microwave Flashing 0:00 means.

What it means

On a countertop microwave, the entry for Flashing 0:00 says “A flashing '0:00' means there has been a power failure.” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

When to call a technician

Flashing 0:00 returns, or the countertop microwave behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag microwave Flashing 0:00: Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

  2. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Record Flashing 0:00 character by character and note the product type: countertop microwave.

  3. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Maytag prints no reset for Flashing 0:00, so record what the microwave does rather than guessing a fix.

  4. Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Write down the model and serial numbers and the exact Flashing 0:00 wording before you call.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Ask whether Flashing 0:00 is a mode someone switched on; Maytag describes it as a setting.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact Flashing 0:00 wording before you call.

Does Flashing 0:00 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave heating.

Conceptual Microwave sectionMagnetronWaveguideCavity and turntableControl board1234
  1. 1Magnetron
  2. 2Waveguide
  3. 3Cavity and turntable

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What is Maytag saying with Flashing 0:00 on your countertop microwave?

The countertop microwave entry for Flashing 0:00 reads “A flashing '0:00' means there has been a power failure.” That is the whole explanation Maytag prints.

Read the supporting manual

How do I handle Flashing 0:00 on the countertop microwave step by step?

Maytag's page for Flashing 0:00 gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the microwave shows.

Read the supporting manual

Can I treat LOC like Flashing 0:00?

LOC is a separate entry from Flashing 0:00 on the countertop microwave page, with its own wording.

Read the supporting manual

Is the countertop microwave fine to use with Flashing 0:00 on the display?

Switch the mode off if it is not what you want. Never open a panel on the countertop microwave yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

Flashing 0:00 - Error Code - Countertop Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-12; PH 10279 / PH 10279 (countertop microwave)

Flashing 0:00 comes from Maytag Product Help (PH 10279) for the countertop microwave, read in November 2026; the Flashing 0:00 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What is Flashing 0:00 on a Maytag countertop microwave?

The countertop microwave page reads “A flashing '0:00' means there has been a power failure.” It prints nothing more about cause.

What does Maytag suggest for Flashing 0:00?

No; Maytag gives Flashing 0:00 no reset steps. If it repeats, schedule a visit.

Does Flashing 0:00 mean something has failed?

Nothing about replacing parts is printed for Flashing 0:00.

What helps most on the first visit for Flashing 0:00?

The model number, what Flashing 0:00 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.