Maytag microwave D1:0 / Door and lid

Maytag microwave
error code D1:0

Microwave / display referenceD1:0

D1:0 on a Maytag countertop microwave is explained as “D1: _ 0 or D1: _ 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as D1:0

Last reviewed

Microwave / display referenceD1:0
Meaning
D1:0 on a Maytag countertop microwave is explained as “D1: _ 0 or D1: _ 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Owner checks first, then a technician
Source
D1:0 or D1:1- Countertop Microwave - Product Help | Maytag

What Maytag microwave D1:0 means.

What it means

D1:0 on a Maytag countertop microwave is explained as “D1: _ 0 or D1: _ 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Microwaves keep a charge when unplugged, so the casing stays shut.

When to call a technician

D1:0 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag microwave D1:0: Countertop microwave with its door open, showing the black door latch hooks and the interlock plungers on the cavity frame, a glass turntable inside.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Microwaves keep a charge when unplugged, so the casing stays shut.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Match the label on your appliance to the countertop microwave list before you rely on the wording for D1:0.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    No reset is printed here; note the behavior of the microwave around D1:0 instead.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Note the model and the moment D1:0 showed up; both help us plan.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Check your model manual for what D1:0 means before treating it as a breakdown.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Keep the model number close and note when D1:0 appeared and what the countertop microwave was doing.

Does D1:0 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave door.

Conceptual Microwave sectionDoorDoor switchesControl123
  1. 1Door
  2. 2Door switches
  3. 3Control

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print beside D1:0 for a countertop microwave?

D1:0 is covered by this wording on the countertop microwave page: “D1: 0 or D1: 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.”

Read the supporting manual

How do I handle D1:0 on the countertop microwave step by step?

Maytag's page for D1:0 gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the microwave shows.

Read the supporting manual

How far apart are D1:0 and Colon Flashing?

Colon Flashing is a separate entry from D1:0 on the countertop microwave page, with its own wording.

Read the supporting manual

Should the family keep using the countertop microwave with D1:0 showing?

Use the countertop microwave if it behaves normally; stop if there are odd noises, smells or heat.

Read the supporting manual

The manual behind the message.

Manufacturer document

D1:0 or D1:1- Countertop Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-12; PH 14639 / PH 14639 (countertop microwave)

Facts for D1:0 are from the countertop microwave table (PH 14639) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What is D1:0 on a Maytag countertop microwave?

Maytag's wording is “D1: _ 0 or D1: _ 1 will be displayed to indicate if the 2-step door function operation is enabled or disabled.” That is the whole entry.

Is there a reset for D1:0?

There is no reset on that page. Note what happens and book us if D1:0 persists.

Does D1:0 mean something has failed?

Nothing about replacing parts is printed for D1:0.

What do you need to know about D1:0?

Tell us the model, the display wording and when D1:0 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.