What it means
The Maytag page for Colon Flashing on a countertop microwave states “The colon, between the digits in the display, will flash when the time is set.” No reset is printed for it, so schedule a visit if it keeps appearing.
Maytag microwave Colon Flashing / Information
The Maytag page for Colon Flashing on a countertop microwave states “The colon, between the digits in the display, will flash when the time is set.” No reset is printed for it, so schedule a visit if it keeps appearing.
Also printed as Colon Flashing
The Maytag page for Colon Flashing on a countertop microwave states “The colon, between the digits in the display, will flash when the time is set.” No reset is printed for it, so schedule a visit if it keeps appearing.
Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.
Colon Flashing repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

Check that your appliance is a countertop microwave and copy Colon Flashing exactly as the display shows it.

Maytag prints no reset for Colon Flashing, so record what the microwave does rather than guessing a fix.

Write down the model and serial numbers and the exact Colon Flashing wording before you call.
Check your model manual for what Colon Flashing means before treating it as a breakdown.
Keep the model number close and note when Colon Flashing appeared and what the countertop microwave was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Colon Flashing is covered by this wording on the countertop microwave page: “The colon, between the digits in the display, will flash when the time is set.”
Read the supporting manualNo reset is printed for Colon Flashing on the countertop microwave page. Writing down what the microwave does around the code is the useful thing to do.
Read the supporting manual"Door" Or "Open/Close" is a neighbor of Colon Flashing, not a synonym. The reset may overlap; the text does not.
Read the supporting manualUse the countertop microwave if it behaves normally; stop if there are odd noises, smells or heat.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-12; PH 10277 / PH 10277 (countertop microwave)
Scope for Colon Flashing: Maytag countertop microwave, PH 10277, checked November 2026. Maytag lists no models on the Colon Flashing page.
On the countertop microwave page the line is “The colon, between the digits in the display, will flash when the time is set.” No further cause is given.
There is no reset on that page. Note what happens and book us if Colon Flashing persists.
Nothing about replacing parts is printed for Colon Flashing.
Tell us the model, the display wording and when Colon Flashing first showed up.
Maytag codes, symptoms, parts and service
For a countertop microwave showing "Door" Or "Open/Close", Maytag prints “If 'Door' or 'Open/Close' is appearing on the microwave display, there are things you can do to troubleshoot.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.