Inside the appliance
Microwave control lock and 2-step door (LOC, EA:0, D1:0). In plain English.
On a Maytag countertop microwave, LOC, L or a padlock icon means the control lock is on. Product Help says to hold Cancel for 3 seconds, or Start for 5 seconds, depending on the model. EA and D1 show whether the 2-step door opening is turned on or off.

Where it fits.
Microwave control lock and 2-step door (LOC, EA:0, D1:0) in the appliance
On the control panel of a countertop microwave, shown as LOC, L or a padlock on the display.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Microwave control lock and 2-step door (LOC, EA:0, D1:0) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Look for LOC or a padlock
The control lock is on. This is a setting, not a breakdown.
- 2
Hold the right key
Cancel for 3 seconds, or Start for 5, depending on the model.
- 3
Try the 2-step door
Press Stop, then the door release button.
- 4
Check EA or D1
Hold Stop/Unlock for 3 seconds to see EA:_0. Plus changes it to EA:_1, and Start confirms.
Cleaning or replacement?
Leave internal testing to a technician.
LOC stays after the key is held for the full time.
The door will not release after Stop and the release button.
The keys do not respond at all.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Microwave control lock and 2-step door (LOC, EA:0, D1:0) advice. Read the manual for your own model.
- LOC or "L" or Padlock Icon - Error Code - Countertop Microwave - Product Help | Maytag
- LOC or "L" or Padlock Icon - Over-the-Range Microwave - Product Help | Maytag
- EA:_0 or EA:1 - Countertop Microwave - Product Help | Maytag
- D1:0 or D1:1- Countertop Microwave - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does LOC mean?
The control lock is enabled, so the keys are ignored until you hold the unlock key for the time your model needs.
What is the 2-step door?
A feature on some models that needs Stop and then the door release, to keep young children out.
Should I turn it off?
Product Help says to disable it only when sure no children are around.
What are EA:_0 and EA:_1?
They show the 2-step door setting after you hold Stop/Unlock for 3 seconds. Plus switches the value and Start confirms it.
Maytag codes, symptoms, parts and service
From the message to what you do next.
LOC
On a countertop microwave, the entry for LOC says “A new 2-step door-opening feature has been added to some microwaves to help avoid unintended access.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
Maytag microwave will not start
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Microwave repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


