Model-specific code library

Maytag microwave Sensors codes

17 printed codes in this group: E11, E12, E21, E22, E24, E61, E62, E63, F3C, F3H and 7 more.

A hand wiping the cavity ceiling of an open microwave with a gray microfiber cloth, a small grid of sensor vent holes on the side wall.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Sensors codes

E11

Maytag says the gas sensor reported a problem to the control board for E11; the problem may be the gas sensor or its wiring. Reset at the breaker for one minute and monitor for one minute. If E11 returns, book a technician.

Reset, then book
E12

Maytag words E12 as “a problem with the Gas Sensor or the associated wiring.” Turn the breaker off for one minute and monitor for one minute. If E12 returns, schedule a technician.

Reset, then book
E21

Maytag words E21 as the thermal sensor circuit reporting open to the control board. The thermal sensor, the control board or the wiring may be the cause. Reset at the breaker for one minute; book a technician if E21 returns.

Reset, then book
E22

Maytag words E22 as the thermal sensor circuit reporting a short to the control board. The thermal sensor, the appliance control board or the wiring may be the cause. Reset at the breaker for one minute; book a technician if it returns.

Reset, then book
E24

Maytag prints E24 as the oven reaching an overheat condition of 500F (260C). The thermal sensor, gas sensor, appliance control board or wiring may be the cause. Let it cool, reset at the breaker for one minute, and book a visit if it returns.

Reset, then book
E61

Maytag words E61 as the oven sensor circuit reporting an open condition to the control board. The sensor, the appliance control board or the wiring may be the cause. Reset at the breaker for one minute and monitor for one minute.

Reset, then book
E62

Maytag words E62 as the oven sensor circuit reporting a shorted condition to the control board. The page is the same as E63. Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.

Reset, then book
E63

Maytag words E63 as the oven sensor circuit reporting a shorted condition to the control board, exactly as for E62. Reset at the breaker for one minute and monitor for one minute; if E63 returns, book a technician.

Reset, then book
F3C

Maytag words F3C as a possible problem with the cavity temperature thermistor or its wiring. Reset at the breaker for one minute and monitor for one minute. F4E1 names the same part under a different code.

Reset, then book
F3H

Maytag words F3H as a possible problem with the humidity thermistor or its wiring. Reset at the breaker for one minute and monitor the oven for one minute. F3H1 and F4E4 name closely related parts.

Reset, then book
F3H1

Maytag words F3H1 as a possible problem with the humidity sensor or its wiring. Reset at the breaker for one minute and monitor the oven for one minute; schedule a technician if F3H1 returns.

Reset, then book
F3T1

Maytag's over-the-range microwave page links F3T1 to the user interface thermistor or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F3T2

Maytag prints this code as F3.t2 in the page heading and words it as a possible problem with the convection thermistor or its wiring. Reset at the breaker for one minute; if it returns, schedule a technician.

Reset, then book
F3T3

Maytag words F3T3 as a possible problem with the hood temperature thermistor or its wiring. Reset at the breaker for one minute and monitor for one minute. If F3T3 returns, schedule a technician.

Reset, then book
F3T4

Maytag words F3T4 as a possible problem with the magnetron temperature thermistor or its wiring. Reset at the breaker for one minute; book a technician if F3T4 returns. Do not run the microwave repeatedly with the code showing.

Reset, then book
F4E1

The Maytag over-the-range microwave entry for F4E1 names the cavity temperature thermistor or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
F4E4

Maytag words F4E4 as a possible problem with the humidity thermistor or its wiring, the same cause as F3H. Reset at the breaker for one minute and monitor the microwave for one minute; schedule a technician if it returns.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.