Maytag microwave F3C / Sensors

Maytag microwave
error code F3C

Microwave / display referenceF3C

Maytag words F3C as a possible problem with the cavity temperature thermistor or its wiring. Reset at the breaker for one minute and monitor for one minute. F4E1 names the same part under a different code.

Also printed as F3C

Last reviewed

Microwave / display referenceF3C
Meaning
Maytag words F3C as a possible problem with the cavity temperature thermistor or its wiring. Reset at the breaker for one minute and monitor for one minute. F4E1 names the same part under a different code.
Who handles it
Reset, then book
Related codes
Source
F3C - Error Code - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave F3C means.

What it means

Maytag words F3C as a possible problem with the cavity temperature thermistor or its wiring. Reset at the breaker for one minute and monitor for one minute. F4E1 names the same part under a different code.

What you can safely check

Microwaves keep a charge when unplugged, so the casing stays shut.

When to call a technician

F3C returns after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag microwave F3C: A hand wiping the cavity ceiling of an open microwave with a gray microfiber cloth, a small grid of sensor vent holes on the side wall.
    Illustration. Follow your model’s instructions.
    Before you begin

    Cancel and cool

    Cancel the program and let the cavity cool.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Breaker off for one minute

    Then on again.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Monitor the oven

    The page says to monitor the oven for one minute and verify oven operation.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Compare with F4E1

    F4E1 reads the same. Note which code you actually saw.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Leave the housing closed

    Do not open the microwave housing; sensors, boards and wiring sit behind high-voltage parts.

Does F3C keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Small black-tipped temperature probe on a screwed metal bracket inside a microwave cavity, with a white-sleeved wire lead

Component reference

Microwave cavity thermistor (F3C, F4E1)

On a Maytag over-the-range microwave, F3C and F4E1 both name the cavity temperature thermistor or its wiring.

Read the definition

A little more context.

Why does F4E1 read the same?

F4E1 says there may be a problem with the cavity temperature thermistor or the associated wiring. Maytag gives two codes for one named part.

Read the supporting manual

The manual behind the message.

Manufacturer document

F3C - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10356 / PH 10356 (over-the-range microwave)

Manufacturer document

F4E1 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10363 / PH 10363 (over-the-range microwave)

Manufacturer document

F3H - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10358 / PH 10358 (over-the-range microwave)

Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10356, with the F4E1 and F3H pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What is a cavity thermistor?

A temperature sensor for the oven cavity.

Do I need a technician?

The page says you may need a qualified technician if it returns.

Is F3C related to E21?

E21 concerns the thermal sensor circuit; this is the cavity thermistor.

How long is the reset?

One minute.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.