What it means
Maytag lists the user interface (touchpad) or the wiring for F2Q1 on the over-the-range microwave. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag microwave F2Q1 / User interface
Maytag lists the user interface (touchpad) or the wiring for F2Q1 on the over-the-range microwave. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as F2Q1
Maytag lists the user interface (touchpad) or the wiring for F2Q1 on the over-the-range microwave. Reset the power first and watch the display; a returning the code is the cue to book us.
Microwaves keep a charge when unplugged, so the casing stays shut.
F2Q1 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Microwaves keep a charge when unplugged, so the casing stays shut.

Match the label on your appliance to the over-the-range microwave list before you rely on the wording for F2Q1.

Breaker off for one full minute, then back on, and look for F2Q1.

Give the microwave a minute on screen after the reset; a returning F2Q1 means schedule a visit.
Do not pry at the panel; the keypad connections are bench work.
Write down the model and serial numbers and the exact F2Q1 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's over-the-range microwave page says F2Q1 may come from the user interface (touchpad) or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the microwave in view for another minute and note whether F2Q1 returns.
Read the supporting manualMaytag lists the vent fan and light switch (located on the lower left front side panel) or the wiring against F2H2, while F2Q1 gets the user interface (touchpad) or the wiring. They are neighbors in the over-the-range microwave list but separate entries.
Read the supporting manualIf the display jumps or keys misfire, leave the over-the-range microwave off until a technician has looked. If F2Q1 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10354 / PH 10354 (over-the-range microwave)
Scope for F2Q1: Maytag over-the-range microwave, PH 10354, checked November 2026. Maytag lists no models on the F2Q1 page.
The over-the-range microwave page ties F2Q1 to the user interface (touchpad) or the wiring without saying which has failed.
Try it first: one minute off, one minute on screen. If F2Q1 persists, a technician should look.
Not from the code alone: the entry lists the user interface (touchpad) or the wiring and stops.
The model and serial numbers, the exact display for F2Q1, and what the over-the-range microwave was doing at the time.
Maytag codes, symptoms, parts and service
Maytag lists the vent fan and light switch (located on the lower left front side panel) or the wiring for F2H2 on the over-the-range microwave. Reset the power first and watch the display; a returning the code is the cue to book us.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.