What it means
Maytag words E62 as the oven sensor circuit reporting a shorted condition to the control board. The page is the same as E63. Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Maytag microwave E62 / Sensors
Maytag words E62 as the oven sensor circuit reporting a shorted condition to the control board. The page is the same as E63. Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Also printed as E62
Maytag words E62 as the oven sensor circuit reporting a shorted condition to the control board. The page is the same as E63. Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.
Microwaves keep a charge when unplugged, so the casing stays shut.
E62 returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

End cooking.

Then on again.

Verify operation.

The pages are alike, so your exact code is the detail we need.
Do not open the microwave housing; sensors, boards and wiring sit behind high-voltage parts.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The oven sensor circuit reported a shorted condition to the control board. The sensor, the appliance control board or the associated wiring may be the cause.
Read the supporting manualThe text is identical. Maytag prints two codes with one explanation.
Read the supporting manualE61 is an open condition. E62 is shorted.
Read the supporting manualIt is the only step; a repeat needs a technician.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10338 / PH 10338 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10337 / PH 10337 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10339 / PH 10339 (over-the-range microwave)
Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10338, with the E61 and E63 pages.
Whichever your display shows. Maytag prints identical text for both, so the code is the only way to tell the two entries apart and it is worth telling us exactly which one you saw.
Maytag does not say. The page only reports a shorted condition on the oven sensor circuit, so avoid sensor-based cooking until the code stays away after the reset.
The page prints no warning. As a precaution, stop using the microwave and book a visit if you smell burning or see smoke while E62 is showing.
No. Maytag prints no cleaning step for E62. The page lists the sensor, the appliance control board or the wiring, and only the breaker reset is meant for home use.
Maytag codes, symptoms, parts and service
Maytag words E61 as the oven sensor circuit reporting an open condition to the control board. The sensor, the appliance control board or the wiring may be the cause. Reset at the breaker for one minute and monitor for one minute.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.