Maytag microwave F3T4 / Sensors

Maytag microwave
error code F3T4

Microwave / display referenceF3T4

Maytag words F3T4 as a possible problem with the magnetron temperature thermistor or its wiring. Reset at the breaker for one minute; book a technician if F3T4 returns. Do not run the microwave repeatedly with the code showing.

Also printed as F3T4

Last reviewed

Microwave / display referenceF3T4
Meaning
Maytag words F3T4 as a possible problem with the magnetron temperature thermistor or its wiring. Reset at the breaker for one minute; book a technician if F3T4 returns. Do not run the microwave repeatedly with the code showing.
Who handles it
Reset, then book
Related codes
Source
F3T4 - Error Code - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave F3T4 means.

What it means

Maytag words F3T4 as a possible problem with the magnetron temperature thermistor or its wiring. Reset at the breaker for one minute; book a technician if F3T4 returns. Do not run the microwave repeatedly with the code showing.

What you can safely check

Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

When to call a technician

F3T4 returns after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag microwave F3T4: A hand wiping the cavity ceiling of an open microwave with a gray microfiber cloth, a small grid of sensor vent holes on the side wall.
    Illustration. Follow your model’s instructions.
    Before you begin

    Let the unit cool

    The magnetron makes the heat in a microwave. Cancel the program and wait before restarting.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Breaker off for one minute

    Turn the circuit breaker off for one minute, then back on, and monitor the oven for one minute as the page says.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Run one short test

    After the reset, a short manual time shows whether the code stays away.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Stop if it returns

    A magnetron temperature code that comes back is not worth repeated tries.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Leave the housing closed

    Do not open the microwave housing; thermistors, boards and wiring sit behind high-voltage parts.

Does F3T4 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does F3T4 say?

There may be a problem with the magnetron temperature thermistor or the associated wiring.

Read the supporting manual

How is F3T4 different from the other thermistor codes?

F3T3 names the hood temperature thermistor. F3T2 the convection thermistor. F3C the cavity temperature thermistor. F3T4 is the magnetron one.

Read the supporting manual

Why stop after a repeat?

The page names a temperature sensor on the part that generates microwave energy; a technician should check the sensor and wiring before more heavy use.

Read the supporting manual

The manual behind the message.

Manufacturer document

F3T4 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10362 / PH 10362 (over-the-range microwave)

Manufacturer document

F3T3 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10361 / PH 10361 (over-the-range microwave)

Manufacturer document

F3T2 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10360 / PH 10360 (over-the-range microwave)

Manufacturer document

F3C - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10356 / PH 10356 (over-the-range microwave)

Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10362, with the F3T3, F3T2 and F3C pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Is the magnetron broken?

The page names the thermistor on it, not the magnetron itself.

Can I keep microwaving?

After a clean reset, short runs are reasonable. Stop if the code returns.

Is it expensive?

No price is printed; we quote after diagnosis.

What should I record?

The code and the program in use.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.