Maytag microwave F4E1 / Sensors

Maytag microwave
error code F4E1

Microwave / display reference

The Maytag over-the-range microwave entry for F4E1 names the cavity temperature thermistor or the wiring. Reset first, then call us in if the code keeps coming back.

Also printed as F4E1

Last reviewed

Microwave / display reference
Meaning
The Maytag over-the-range microwave entry for F4E1 names the cavity temperature thermistor or the wiring. Reset first, then call us in if the code keeps coming back.
Who handles it
Reset, then book
Related codes
Source
F4E1 - Error Code - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave F4E1 means.

What it means

The Maytag over-the-range microwave entry for F4E1 names the cavity temperature thermistor or the wiring. Reset first, then call us in if the code keeps coming back.

What you can safely check

Microwaves keep a charge when unplugged, so the casing stays shut.

When to call a technician

F4E1 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag microwave F4E1: A hand wiping the cavity ceiling of an open microwave with a gray microfiber cloth, a small grid of sensor vent holes on the side wall.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Microwaves keep a charge when unplugged, so the casing stays shut.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Check that your appliance is an over-the-range microwave and copy F4E1 exactly as the display shows it.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Leave the breaker off a whole minute before checking for F4E1 again.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Once power is back, keep an eye on the microwave for about a minute for F4E1.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Keep foil, pans and racks clear of the sensor area inside the over-the-range microwave.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Keep the model number close and note when F4E1 appeared and what the over-the-range microwave was doing.

Does F4E1 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Small black-tipped temperature probe on a screwed metal bracket inside a microwave cavity, with a white-sleeved wire lead

Component reference

Microwave cavity thermistor (F3C, F4E1)

On a Maytag over-the-range microwave, F3C and F4E1 both name the cavity temperature thermistor or its wiring.

Read the definition

A little more context.

Which entry in Maytag's over-the-range microwave list covers F4E1?

A over-the-range microwave showing F4E1 is, per Maytag, dealing with a possible problem in the cavity temperature thermistor or the wiring. The page adds no diagnosis.

Read the supporting manual

Which first steps does Maytag give for F4E1?

Turn the microwave's circuit breaker off for one minute, switch it back on, then keep an eye on the microwave for a further minute to see whether F4E1 comes back.

Read the supporting manual

Is F4E1 the same as F3T4 on a over-the-range microwave?

Read the exact display: F3T4 means the magnetron temperature thermistor or the wiring on the over-the-range microwave page, and F4E1 means the cavity temperature thermistor or the wiring.

Read the supporting manual

Should the family keep using the over-the-range microwave with F4E1 showing?

A sensor that misreads can mean wrong temperatures, so check food with a thermometer while the over-the-range microwave is in use.

Read the supporting manual

The manual behind the message.

Manufacturer document

F4E1 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10363 / PH 10363 (over-the-range microwave)

Facts for F4E1 are from the over-the-range microwave table (PH 10363) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What is F4E1 on a Maytag over-the-range microwave?

The over-the-range microwave page ties F4E1 to the cavity temperature thermistor or the wiring without saying which has failed.

Can a breaker reset fix F4E1?

It is the page's first step and costs nothing. A returning F4E1 afterward means schedule us.

Which parts does Maytag blame for F4E1?

No. the cavity temperature thermistor or the wiring are all candidates and the page gives no way to choose.

What should I have ready when I schedule for F4E1?

The model and serial numbers, the exact display for F4E1, and what the over-the-range microwave was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.