What it means
Maytag words F3H as a possible problem with the humidity thermistor or its wiring. Reset at the breaker for one minute and monitor the oven for one minute. F3H1 and F4E4 name closely related parts.
Maytag microwave F3H / Sensors
Maytag words F3H as a possible problem with the humidity thermistor or its wiring. Reset at the breaker for one minute and monitor the oven for one minute. F3H1 and F4E4 name closely related parts.
Also printed as F3H
Maytag words F3H as a possible problem with the humidity thermistor or its wiring. Reset at the breaker for one minute and monitor the oven for one minute. F3H1 and F4E4 name closely related parts.
Microwaves keep a charge when unplugged, so the casing stays shut.
F3H returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

Cancel the program, then let steam clear from the cavity.

Then back on.

The page says to monitor the oven and verify oven operation.

F3H1 reads humidity sensor; F3H reads humidity thermistor. Write down which.
Do not open the microwave housing; sensors, boards and wiring sit behind high-voltage parts.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag over-the-range microwave, F3H1 names the humidity sensor, while F3H and F4E4 name the humidity thermistor, and their wiring.
Read the definitionThere may be a problem with the humidity thermistor or the associated wiring.
Read the supporting manualF3H1 says the humidity sensor. The pages do not explain the difference between a humidity sensor and a humidity thermistor.
Read the supporting manualF4E4 also names the humidity thermistor or its wiring.
Read the supporting manualF3C is the cavity temperature thermistor.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10358 / PH 10358 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10357 / PH 10357 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10364 / PH 10364 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10356 / PH 10356 (over-the-range microwave)
Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10358, with the F3H1, F4E4 and F3C pages.
Maytag does not describe its job on the F3H page. The page only names the humidity thermistor and its wiring as the possible problem and gives the breaker reset.
The page states no cause beyond the humidity thermistor and the wiring. If F3H came up during a sensor cooking program, tell us, since that detail helps a technician.
Yes. Turn the breaker off for one minute, turn it back on and monitor the oven for one minute. That is the only home step on the page, and a returning code means a visit.
Maytag gives no severity for F3H. Until the code stays away after the reset, avoid relying on sensor cooking programs and use plain timed cooking instead.
Maytag codes, symptoms, parts and service
Maytag words F3H1 as a possible problem with the humidity sensor or its wiring. Reset at the breaker for one minute and monitor the oven for one minute; schedule a technician if F3H1 returns.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
On a Maytag over-the-range microwave, F3H1 names the humidity sensor, while F3H and F4E4 name the humidity thermistor, and their wiring. The pages share one step: cut power at the breaker for 60 seconds, restore it, and see whether the code reappears within a minute.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.