Model-specific code library

Maytag microwave Information codes

11 printed codes in this group: AccuPop Fail, Colon Flashing, Door or Open Door Closed, F1E1, F1E4, F6, F6E0, F7, F8E5, F9 and 1 more.

Built-in stainless microwave with a glowing control panel showing small blue segments, a ceramic mug on the turntable visible behind the closed glass door.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Information codes

AccuPop Fail

Maytag prints AccuPop Fail as “The oven could not execute the function. There may a problem with the AccuPop Sensor.” Reset at the breaker for one minute and monitor for one minute; book a technician if it returns.

Reset, then book
Colon Flashing

The Maytag page for Colon Flashing on a countertop microwave states “The colon, between the digits in the display, will flash when the time is set.” No reset is printed for it, so schedule a visit if it keeps appearing.

Information only
Door or Open Door Closed

Door or Open Door Closed on a Maytag over-the-range microwave is explained as “This occurs to avoid unintended starting of the microwave oven.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Information only
F1E1

Maytag's over-the-range microwave page words F1E1 like this: “The oven could not execute the function.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Reset, then book
F1E4

Maytag words F1E4 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute; book a technician if it returns.

Reset, then book
F6

Maytag words F6 as “The oven could not execute the function,” with a possible problem in the relay control board or the wiring. Reset at the breaker for one minute and monitor for one minute; if F6 returns, book a technician.

Reset, then book
F6E0

Maytag words F6E0 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute and monitor for one minute; book a technician if F6E0 returns.

Reset, then book
F7

Maytag words F7 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute and monitor for one minute. F7E9, a separate page, is about a blocked upper vent door.

Reset, then book
F8E5

Maytag words F8E5 as “The oven could not execute the function,” with a possible problem in the exhaust air temperature sensor or its wiring. Reset at the breaker for one minute; book a technician if F8E5 returns.

Reset, then book
F9

Maytag words F9 as “The oven could not execute the function,” and lists the appliance control board, the relay control board or the wiring. Reset at the breaker for one minute; if F9 returns, schedule a technician.

Reset, then book
F9Q1

Maytag words F9Q1 as “The oven could not execute the function,” with a possible problem in the user interface touch pad or its wiring. Reset at the breaker for one minute; book a technician if F9Q1 returns.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.