What it means
Maytag's over-the-range microwave page words F1E1 like this: “The oven could not execute the function.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag microwave F1E1 / Information
Maytag's over-the-range microwave page words F1E1 like this: “The oven could not execute the function.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as F1E1
Maytag's over-the-range microwave page words F1E1 like this: “The oven could not execute the function.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.
F1E1 returns, or the over-the-range microwave behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

Match the label on your appliance to the over-the-range microwave list before you rely on the wording for F1E1.

Cut power at the breaker for a minute, restore it, then check for F1E1.

Once power is back, keep an eye on the microwave for about a minute for F1E1.
Write down the exact words or symbols the over-the-range microwave shows before you do anything.
Keep the model number close and note when F1E1 appeared and what the over-the-range microwave was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for F1E1 on an over-the-range microwave: “The oven could not execute the function.”
Read the supporting manualTurn the microwave's circuit breaker off for one minute, switch it back on, then keep an eye on the microwave for a further minute to see whether F1E1 comes back.
Read the supporting manualF1E4 is a neighbor of F1E1, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhether the over-the-range microwave is safe depends on how it behaves, not the message alone. Never open a panel on the over-the-range microwave yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10349 / PH 10349 (over-the-range microwave)
F1E1 comes from Maytag Product Help (PH 10349) for the over-the-range microwave, read in November 2026; the F1E1 entry names no models.
On the over-the-range microwave page the line is “The oven could not execute the function.” No further cause is given.
As long as F1E1 stays on the over-the-range microwave, it sometimes does. When the code is on the display of an over-the-range microwave, breaker off for a full minute, then on, then a minute of watching. If the code returns, schedule a visit.
No part is named for F1E1; the page gives only the wording above.
Model and serial numbers plus a note of what happened when F1E1 appeared.
Maytag codes, symptoms, parts and service
Maytag words F1E4 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute; book a technician if it returns.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.