What it means
Maytag words F9Q1 as “The oven could not execute the function,” with a possible problem in the user interface touch pad or its wiring. Reset at the breaker for one minute; book a technician if F9Q1 returns.
Maytag microwave F9Q1 / Information
Maytag words F9Q1 as “The oven could not execute the function,” with a possible problem in the user interface touch pad or its wiring. Reset at the breaker for one minute; book a technician if F9Q1 returns.
Also printed as F9Q1
Maytag words F9Q1 as “The oven could not execute the function,” with a possible problem in the user interface touch pad or its wiring. Reset at the breaker for one minute; book a technician if F9Q1 returns.
Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.
F9Q1 returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

Wipe the control area and make sure nothing presses on it. The page blames the touch pad.

Turn the circuit breaker off for one minute, then back on, and monitor the oven for one minute as the page says.

Cancel what was running.

Note which keys respond. A dead key narrows the problem.
Do not open the microwave housing; thermistors, boards and wiring sit behind high-voltage parts.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The oven could not execute the function; there may be a problem with the user interface (touch pad) or the associated wiring.
Read the supporting manualF9Q prints no cause.
Read the supporting manualF9 lists the control boards. F8E5 names the exhaust air temperature sensor.
Read the supporting manualIt is the one named, with the wiring.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10370 / PH 10370 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10371 / PH 10371 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10372 / PH 10372 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10369 / PH 10369 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10351 / PH 10351 (over-the-range microwave)
Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10370, with the F9Q, F9 and F8E5 pages.
The page does not say. It names the user interface touch pad and its wiring as the possible problem, but it prints no cleaning step, so wiping the pad is only a harmless first look.
Maytag does not say. Tell us whether the display lights normally and which keys respond, because that narrows down whether the touch pad is involved.
A technician decides. The page lists the touch pad or its wiring as possible problems but gives no test, so nothing should be replaced before the cause is confirmed.
Tell us which keys fail or respond, the exact code and whether the one-minute breaker reset changed anything.
Maytag codes, symptoms, parts and service
Maytag words F8E5 as “The oven could not execute the function,” with a possible problem in the exhaust air temperature sensor or its wiring. Reset at the breaker for one minute; book a technician if F8E5 returns.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.