What it means
Maytag’s F9Q page prints no cause, only the reset: breaker off for one minute, on again, monitor the oven for one minute. If F9Q returns, schedule a technician. F9Q1 and F9 do print causes.
Maytag microwave F9Q / Reset only
Maytag’s F9Q page prints no cause, only the reset: breaker off for one minute, on again, monitor the oven for one minute. If F9Q returns, schedule a technician. F9Q1 and F9 do print causes.
Also printed as F9Q
Maytag’s F9Q page prints no cause, only the reset: breaker off for one minute, on again, monitor the oven for one minute. If F9Q returns, schedule a technician. F9Q1 and F9 do print causes.
Microwaves keep a charge when unplugged, so the casing stays shut.
F9Q returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

F9Q has no digit at the end. F9Q1 does. Check your display.

Turn the circuit breaker off for one minute, then back on, and monitor the oven for one minute as the page says.

Cancel what was running.
A short timed run shows whether the code returns.
Do not open the microwave housing; thermistors, boards and wiring sit behind high-voltage parts.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The page gives “Possible Solution”, the reset steps and the qualified technician line. It names no part and says no function failed.
Read the supporting manualF9Q1 says the oven could not execute the function and names the user interface touch pad. F9 lists two boards.
Read the supporting manualNo. It means Maytag printed nothing.
Read the supporting manualReset, then book a visit if it returns.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10371 / PH 10371 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10370 / PH 10370 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10372 / PH 10372 (over-the-range microwave)
Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10371, with the F9Q1 and F9 pages.
The page does not print one. It lists a possible solution, the breaker reset and the qualified technician line, but it never says which part may be involved.
Not stated. F9Q1, the code with the extra digit, names the user interface touch pad, but the F9Q page does not name any part.
Please do not. With no cause printed, the honest approach is to do the reset the page describes and book a visit if F9Q returns.
Give us the microwave model and the exact code, including whether your display shows a digit after the Q. Also say whether the breaker reset cleared it.
Maytag codes, symptoms, parts and service
Maytag words F9Q1 as “The oven could not execute the function,” with a possible problem in the user interface touch pad or its wiring. Reset at the breaker for one minute; book a technician if F9Q1 returns.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.