Maytag microwave F6E0 / Information

Maytag microwave
error code F6E0

Microwave / display reference

Maytag words F6E0 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute and monitor for one minute; book a technician if F6E0 returns.

Also printed as F6E0

Last reviewed

Microwave / display reference
Meaning
Maytag words F6E0 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute and monitor for one minute; book a technician if F6E0 returns.
Who handles it
Reset, then book
Related codes
Source
F6E0 - Error Code - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave F6E0 means.

What it means

Maytag words F6E0 as “The oven could not execute the function,” with a possible problem in the appliance control board or the wiring. Reset at the breaker for one minute and monitor for one minute; book a technician if F6E0 returns.

What you can safely check

Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

When to call a technician

F6E0 returns after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag microwave F6E0: Built-in stainless microwave with a glowing control panel showing small blue segments, a ceramic mug on the turntable visible behind the closed glass door.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stop the program

    Cancel what the microwave was doing.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Breaker off for one minute

    Turn the circuit breaker off for one minute, then back on, and monitor the oven for one minute as the page says.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Compare with F6

    F6 names the relay control board. F6E0 names the appliance control board.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Run a short timed test

    It shows whether basic heating works.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Leave the housing closed

    Do not open the microwave housing; thermistors, boards and wiring sit behind high-voltage parts.

Does F6E0 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does F6E0 say?

The oven could not execute the function; there may be a problem with the appliance control board or the associated wiring.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6E0 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10366 / PH 10366 (over-the-range microwave)

Manufacturer document

F6 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10367 / PH 10367 (over-the-range microwave)

Manufacturer document

F7 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-25; PH 10368 / PH 10368 (over-the-range microwave)

Manufacturer document

F1E4 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10350 / PH 10350 (over-the-range microwave)

Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10366, with the F6, F7 and F1E4 pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What is the appliance control board?

Maytag does not elaborate. It is named on the page as the board that may be the problem together with the wiring, and the page describes no test or part number for it.

Is F6E0 the same as F7?

The text is identical: both say the oven could not execute the function and name the appliance control board or the wiring. They remain separate pages, so tell us which code you saw.

Does the breaker reset work for F6E0?

It is the only step on the page: breaker off for one minute, back on, then monitor the microwave for one minute. If F6E0 returns, book a visit.

What should I note before booking for F6E0?

Note the exact code and what the microwave was doing when it appeared. The page does not say which function failed, so that detail helps a technician.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.