What it means
F4E9 on your over-the-range microwave is tied by Maytag to the smart pop control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag microwave F4E9 / Control board
F4E9 on your over-the-range microwave is tied by Maytag to the smart pop control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as F4E9
F4E9 on your over-the-range microwave is tied by Maytag to the smart pop control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Microwaves keep a charge when unplugged, so the casing stays shut.
F4E9 returns, or the over-the-range microwave behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Microwaves keep a charge when unplugged, so the casing stays shut.

Match the label on your appliance to the over-the-range microwave list before you rely on the wording for F4E9.

Cut power at the breaker for a minute, restore it, then check for F4E9.
Once power is back, keep an eye on the microwave for about a minute for F4E9.
Ask yourself whether a power cut, storm or cleaning cycle came just before F4E9.
Note the model and the moment F4E9 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The over-the-range microwave list ties F4E9 to the smart pop control or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTurn the microwave's circuit breaker off for one minute, switch it back on, then keep an eye on the microwave for a further minute to see whether F4E9 comes back.
Read the supporting manualRead the exact display: F4E4 means the humidity thermistor or the wiring on the over-the-range microwave page, and F4E9 means the smart pop control or the wiring.
Read the supporting manualA control problem can stop heating or cause odd behavior, so stay near the over-the-range microwave while it runs.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10365 / PH 10365 (over-the-range microwave)
Facts for F4E9 are from the over-the-range microwave table (PH 10365) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag lists the smart pop control or the wiring. It is a possible-cause list, not a confirmed failure.
It is the page's first step and costs nothing. A returning F4E9 afterward means schedule us.
Not from the code alone: the entry lists the smart pop control or the wiring and stops.
The model and serial numbers, the exact display for F4E9, and what the over-the-range microwave was doing at the time.
Maytag codes, symptoms, parts and service
Maytag words F4E4 as a possible problem with the humidity thermistor or its wiring, the same cause as F3H. Reset at the breaker for one minute and monitor the microwave for one minute; schedule a technician if it returns.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.