Maytag microwave F6 / Information

Maytag microwave
error code F6

Microwave / display reference

Maytag words F6 as “The oven could not execute the function,” with a possible problem in the relay control board or the wiring. Reset at the breaker for one minute and monitor for one minute; if F6 returns, book a technician.

Also printed as F6

Last reviewed

Microwave / display reference
Meaning
Maytag words F6 as “The oven could not execute the function,” with a possible problem in the relay control board or the wiring. Reset at the breaker for one minute and monitor for one minute; if F6 returns, book a technician.
Who handles it
Reset, then book
Related codes
Source
F6 - Error Code - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave F6 means.

What it means

Maytag words F6 as “The oven could not execute the function,” with a possible problem in the relay control board or the wiring. Reset at the breaker for one minute and monitor for one minute; if F6 returns, book a technician.

What you can safely check

Microwaves keep a charge when unplugged, so the casing stays shut.

When to call a technician

F6 returns after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag microwave F6: Built-in stainless microwave with a glowing control panel showing small blue segments, a ceramic mug on the turntable visible behind the closed glass door.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stop the program

    Cancel what the microwave was doing.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Breaker off for one minute

    Turn the circuit breaker off for one minute, then back on, and monitor the oven for one minute as the page says.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Compare the board named

    F6 names the relay control board. F6E0 names the appliance control board. Check your display for the extra characters.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Try a short manual time

    Basic heating tells you whether the relay board is still switching.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Leave the housing closed

    Do not open the microwave housing; thermistors, boards and wiring sit behind high-voltage parts.

Does F6 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does F6 say?

The oven could not execute the function; there may be a problem with the relay control board or the associated wiring.

Read the supporting manual

How is F6 different from F6E0?

F6E0 uses the same sentence but blames the appliance control board. The F6 page names the relay control board.

Read the supporting manual

Which other codes name the relay control board?

F1E1 does. F9 lists both the appliance control board and the relay control board.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10367 / PH 10367 (over-the-range microwave)

Manufacturer document

F6E0 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10366 / PH 10366 (over-the-range microwave)

Manufacturer document

F1E1 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10349 / PH 10349 (over-the-range microwave)

Manufacturer document

F9 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10372 / PH 10372 (over-the-range microwave)

Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10367, with the F6E0, F1E1 and F9 pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Which function failed when F6 appears?

Maytag does not say. The page only states that the oven could not execute the function and names the relay control board or the wiring as possible problems.

Is the relay control board separate from the main board?

The pages name them separately: F6 and F1E1 name the relay control board, while F6E0, F7 and F1E4 name the appliance control board and F9 lists both.

Can I replace the relay control board myself?

No. Maytag prints no home repair for it, and the board sits inside the microwave housing behind high-voltage parts. Only the breaker reset is meant for home use.

What should I give you when I book for F6?

Give us the microwave model and the exact display text. Also say what the microwave was doing when the code appeared and whether the reset cleared it.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.