Maytag microwave E22 / Sensors

Maytag microwave
error code E22

Microwave / display reference

Maytag words E22 as the thermal sensor circuit reporting a short to the control board. The thermal sensor, the appliance control board or the wiring may be the cause. Reset at the breaker for one minute; book a technician if it returns.

Also printed as E22

Last reviewed

Microwave / display reference
Meaning
Maytag words E22 as the thermal sensor circuit reporting a short to the control board. The thermal sensor, the appliance control board or the wiring may be the cause. Reset at the breaker for one minute; book a technician if it returns.
Who handles it
Reset, then book
Related codes
Source
E22 - Error Code - Over-the-Range Microwave - Product Help | Maytag

What Maytag microwave E22 means.

What it means

Maytag words E22 as the thermal sensor circuit reporting a short to the control board. The thermal sensor, the appliance control board or the wiring may be the cause. Reset at the breaker for one minute; book a technician if it returns.

What you can safely check

Microwaves keep a charge when unplugged, so the casing stays shut.

When to call a technician

E22 returns after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag microwave E22: A hand wiping the cavity ceiling of an open microwave with a gray microfiber cloth, a small grid of sensor vent holes on the side wall.
    Illustration. Follow your model’s instructions.
    Before you begin

    Cancel the program

    End the cooking program and let the cavity cool.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Breaker off for one minute

    Then back on.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Monitor for one minute

    Verify operation before cooking again.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Note short versus open

    E22 is the shorted wording; E21 is the open wording. Write down which you saw.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Keep the housing closed

    Do not open the microwave housing; sensors, boards and wiring sit behind high-voltage parts.

Does E22 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does E22 say?

The thermal sensor circuit reported a short to the control board, and the page lists the thermal sensor, the appliance control board or the wiring as possible problems.

Read the supporting manual

Why is E22 not simply E21 again?

E21 reports the circuit as open. E22 reports it shorted. The remedy printed is identical.

Read the supporting manual

Does the reset address a short?

The page offers nothing beyond the reset. A short that survives it needs a technician.

Read the supporting manual

The manual behind the message.

Manufacturer document

E22 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10334 / PH 10334 (over-the-range microwave)

Manufacturer document

E21 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10333 / PH 10333 (over-the-range microwave)

Manufacturer document

E24 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10336 / PH 10336 (over-the-range microwave)

Product Help lists no models for this entry; the page covers the over-the-range microwave tree. Source: Product Help PH 10334, with the E21 and E24 pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What is a short here?

The sensor circuit reads as electrically bridged, so the control cannot read a real temperature.

Is E22 a fire risk?

Maytag prints no such warning, but stop using the microwave if you see smoke or smell burning.

Can E22 and E21 appear together?

The pages do not say.

What should I record?

The code, the program and the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.