What it means
Maytag's over-the-range microwave page words FCE1 like this: “The appliance could not connect to the router.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag microwave FCE1 / Wi-Fi and registration
Maytag's over-the-range microwave page words FCE1 like this: “The appliance could not connect to the router.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as FCE1
Maytag's over-the-range microwave page words FCE1 like this: “The appliance could not connect to the router.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.
FCE1 repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the microwave or switch off its breaker before any panel comes off, and never open the casing, because it holds charge.

Check that your appliance is an over-the-range microwave and copy FCE1 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for FCE1.

Give the microwave a minute on screen after the reset; a returning FCE1 means schedule a visit.
Have the network name and password ready before you re-pair the over-the-range microwave.
Keep the model number close and note when FCE1 appeared and what the over-the-range microwave was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The over-the-range microwave entry for FCE1 reads “The appliance could not connect to the router.” That is the whole explanation Maytag prints.
Read the supporting manualTurn the microwave's circuit breaker off for one minute, switch it back on, then keep an eye on the microwave for a further minute to see whether FCE1 comes back.
Read the supporting manualThe over-the-range microwave list prints FCE2 next to FCE1, but with a different line. Look up the one on your display.
Read the supporting manualThe over-the-range microwave cooks or runs as usual without Wi-Fi; only the connected features pause.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2023-08-16; PH 10316 / PH 10316 (over-the-range microwave)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-04-29; PH 10373 / PH 10373 (over-the-range microwave)
FCE1 comes from Maytag Product Help (PH 10316) for the over-the-range microwave, read in November 2026; the FCE1 entry names no models.
The help page states “The appliance could not connect to the router.” Nothing else is added.
Try it first: one minute off, one minute on screen. If FCE1 persists, a technician should look.
Nothing about replacing parts is printed for FCE1.
The model number, what FCE1 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
The Maytag page for FCE2 on a over-the-range microwave states “The appliance could not connect to the router.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
If a Maytag microwave will not start, the display usually explains why: a door message, the LOC padlock icon, or Demo Mode. Reopen and reclose the door first, then check the lock and demo settings before you book a visit.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.