
Independent repair for Maytag laundry and more
Maytag laundry,back to work.
Maytag washers, dryers, dishwashers, refrigerators, ovens and trash compactors, repaired in 9 US metro areas.



The heavy lifting
in your home.
A code on the washer or dryer?
Read the display.
Then decide.
Look up what a Maytag laundry or oven code means before you pick up the phone.
All Maytag error codesF9E1 reads differently by product type: the front-load washer page states its title reads Long Drain Time; the top-load washer page states its title reads Long Drain. Arrange a technician visit with us if it will not go away.
Read the F9E1 checks96 researched washer codes. A message can mean something different on each Maytag model, so trust the manual that came with yours.
Laundry room first, then the whole house
Washers, dryers,
and the rest.












Wet laundry to
a working machine.
Three steps from request to repair.
You stay in the loop the whole way.
1Describe the load problem
Pick washer or dryer and tell us what it does: no spin, no heat, loud thumping. Book online any time.
2Find the real cause
The technician tests the machine and quotes the work. You approve the price before a tool comes out.
3Run a full load
After the repair the technician runs the machine with you and explains what was changed.
Lint, hoses, filters.
Small jobs, big payoff.
All laundry guides
Error codes explained
A code on the display? Wait the right number of minutes.
Read the guide
Troubleshooting
A top-loader that will not agitate or spin: start with the load and the lid.
Read the guide
Troubleshooting
A dryer that tumbles but never warms: check the supply before the machine.
Read the guide
Pump and belt. Drum and seal.
Laundry parts explained
Meet the parts.
- Washer door lock and door switch (F5E3, F22, F5E1)
- On a Maytag front-load washer, F5E3 means the door is not locking properly and F22 is a front door lock issue. Product Help says to shut the door completely, clear anything from the latch, and wipe soap buildup off the lock. F5E1 names the door switch.
- Dryer lint screen and exhaust vent (F4E3, AF)
- Long dry times on a Maytag dryer often trace to airflow. F4E3, AF and Check Vent all say the lint screen or vent is clogged, crushed, kinked or has too many turns. Product Help wants the lint screen cleaned after every use and the home venting every one to two years.
- Dishwasher fill valve (F8E5, F8E2, H2O)
- F8E5 on a Maytag dishwasher lists a fill valve stuck open, and the page leads with stopping the water. Product Help says to shut the water supply when you can reach it, press Cancel one time to quiet the tone, and close the door. Leave power on unless the water cannot be stopped.

Near your laundry room
Nine metro areas.
One call away.
- Tampa Bay
- Orlando
- Miami / South Florida
- New York Metro
- Houston
- Chicagoland
- Los Angeles
- San Diego
- SF Bay Area
A clear price, before the work.
Your technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Care we stand behind.
Maytag deals with repairs its warranty covers. Every repair we complete is backed by our workmanship warranty.
Are you Maytag?
No. We are an independent repair company, and we are not affiliated with or endorsed by Maytag.
My washer will not spin or drain. Should I keep running it?
Stop the cycle and unplug the machine if water is standing in the drum. A load stuck mid-cycle can strain the motor and the door lock, so book a visit rather than trying again and again.
My dryer runs but the clothes stay damp. What is going on?
Poor airflow is the usual cause: a clogged lint screen, a crushed vent hose or a packed exhaust run. A failing heating element or thermal part is the next suspect, and the technician can tell which during one visit.
Is the Maytag trash compactor something you repair?
Yes, where the unit is in a home we serve. Tell us the model when you book and describe whether the ram stops, the drawer sticks or the unit will not start.
Does a Maytag washer code mean the same thing on every model?
Not always. Meanings shift between generations and between top-load and front-load machines, so check the code against your own manual and tell us the exact display text when you book.