Inside the appliance

Washer door lock and door switch (F5E3, F22, F5E1). In plain English.

On a Maytag front-load washer, F5E3 means the door is not locking properly and F22 is a front door lock issue. Product Help says to shut the door completely, clear anything from the latch, and wipe soap buildup off the lock. F5E1 names the door switch.

Last reviewed

Open front-load washer door with a black latch hook screwed to the door frame, drum visible beside it
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Washer door lock and door switch (F5E3, F22, F5E1) in the appliance

On a front-load washer, at the door latch. A top-load washer has a lid lock, which Product Help names on its F5E2 page.

This image is an example of the component type. It will not tell you which replacement is right for your model.

Owner care, within the model instructions.

Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.

  1. 1

    Look for blockers

    Clothing or shipping material in the latch can keep the door from shutting.

  2. 2

    Wipe the lock

    Product Help says detergent and softener can build up around the door lock. Wipe it with a soft, damp cloth.

  3. 3

    Check the load size

    Items sticking out past the door opening, or an overfull basket, can stop the door from shutting.

  4. 4

    Cycle power

    Product Help says to unplug the washer for five minutes, then plug it back in.

Cleaning or replacement?

Leave internal testing to a technician.

The door stays locked after unplugging for two minutes and a Drain and Spin cycle.

F5E3 or F22 returns with an empty, clear latch.

The latch looks cracked or the door will not shut.

Arrange a diagnostic

Sources and model boundaries.

These sources stand behind the Washer door lock and door switch (F5E3, F22, F5E1) advice. Read the manual for your own model.

  • F5 E3 - Front Load Washer - Product Help | Maytag
  • F22 - Front Load Washer - Product Help | Maytag
  • Door Will Not Lock or Unlock - Front Load Washer - Product Help | Maytag

Follow the guide for your own model, and see how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is my new washer door locked?

Product Help says a new washer can arrive with the door locked from normal shipping movement.

Is a locked door after the cycle always a problem?

No. On models with a Fresh Hold cycle, the door stays locked until you push Cancel.

How do I unlock a stuck door?

Unplug the washer, wait about two minutes, plug it in and run Drain and Spin. If it stays locked, book a technician.

What does F5E1 mean?

Maytag lists it as a door switch code. The page asks you to close the door fully and clear anything blocking the switch.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.