What it means
The Maytag page for F22 on a front-load washer states “F22 indicates a front door lock issue.” No reset is printed for it, so schedule a visit if it keeps appearing.
Maytag washer F22 / Door and lid
The Maytag page for F22 on a front-load washer states “F22 indicates a front door lock issue.” No reset is printed for it, so schedule a visit if it keeps appearing.
Also printed as F22
The Maytag page for F22 on a front-load washer states “F22 indicates a front door lock issue.” No reset is printed for it, so schedule a visit if it keeps appearing.
Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.
F22 returns, or the front-load washer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

Check that your appliance is a front-load washer and copy F22 exactly as the display shows it.

No reset is printed here; note the behavior of the washer around F22 instead.

Write down the model and serial numbers and the exact F22 wording before you call.

Do not force a locked door or lid; wait for the front-load washer to finish and release.
Write down the model and serial numbers and the exact F22 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag front-load washer, F5E3 means the door is not locking properly and F22 is a front door lock issue.
Read the definitionThe front-load washer entry for F22 reads “F22 indicates a front door lock issue.” That is the whole explanation Maytag prints.
Read the supporting manualMaytag's page for F22 gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the washer shows.
Read the supporting manualF21 is a separate entry from F22 on the front-load washer page, with its own wording.
Read the supporting manualThe front-load washer will not run a cycle safely with the door or lid not locking, so wait for a visit if it keeps happening. Never open a panel on the front-load washer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-11-19; PH 14600 / PH 14600 (front-load washer)
F22 comes from Maytag Product Help (PH 14600) for the front-load washer, read in November 2026; the F22 entry names no models.
Once F22 appears on a front-load washer, the help page states “F22 indicates a front door lock issue.” Nothing else is added.
No; Maytag gives F22 no reset steps. If it repeats, schedule a visit.
Nothing about replacing parts is printed for F22.
Model and serial numbers plus a note of what happened when F22 appeared.
Maytag codes, symptoms, parts and service
The Maytag page for F21 on a front-load washer states “F21 indicates a drain problem.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag washer that leaves water in the tub usually points to the drain setup before the machine itself: a hose pushed too far into the standpipe, a standpipe under 30 inches, tape sealing the hose, or a clogged drain pump filter. Check those first; if water still stays, book a technician.
On a Maytag front-load washer, F5E3 means the door is not locking properly and F22 is a front door lock issue. Product Help says to shut the door completely, clear anything from the latch, and wipe soap buildup off the lock. F5E1 names the door switch.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.