Start from the symptom
Maytag cooktop electric cooktop will not turn on or heat.
When a Maytag electric cooktop will not turn on or heat, Product Help points to Control Lock, no pan detected, a pan too close to the controls, the automatic shutoff after long use, or the wrong cookware. Unlock it, recenter a suitable pan, wait for the shutoff to clear, and book a technician if nothing responds.

Start with safe observations.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Control Lock
If Lock shows, the surface areas cannot be turned on from the touch controls. Touch and hold LOCK for 3 seconds to unlock.
- 2
No pan detected
A U display means no pan is detected. Place an appropriate size utensil on the cooking area. U can also mean Keep Warm is on.
- 3
Pan near controls
F4 means a pot or pan is too close to the control panel. Center it, move it off the cooktop and wait 5 minutes for the panel to clear.
- 4
Automatic shutoff
F8 means the cooking area ran too long and the shutoff activated. Turn it off, remove utensils and let it cool.
- 5
Cookware
C82 questions the cookware: wrong size, or an empty or dry pan. Aim for a smooth, flat base, straight sides, a lid and medium-to-heavy metal.
- 6
Power reset
Where Product Help calls for it, switch the breaker off, give it a minute, then switch it on.
More about this symptom.
Why will my Maytag cooktop not turn on?#
Start with Control Lock: hold LOCK down for 3 seconds and the cooktop unlocks. 1
What do U, F4 and F8 tell me?#
U means no pan is detected, F4 means a pan is too close to the controls, and F8 means the automatic shutoff activated after long use. 2 3 4
Could the cookware be the problem?#
Yes. C82 raises pan size and empty or dry pans. A smooth, flat base, straight sides and a lid in sturdier metal work best. 5
Systems a technician may investigate.
These parts tie in to the symptom. Noticing it does not prove that any single one has worn out.
If the display adds a code.
Display and signals
On an electric cooktop, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Information
Maytag's electric cooktop page words U like this: “U indicates there is no pan detected.” Try the one-minute breaker reset, and schedule a visit if the code returns.
User interface
Maytag's electric cooktop page words F4 like this: “A pot or pan is too close to the control panel.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Information
F8 means the surface cooking area ran too long and its automatic shutoff activated. Turn off the surface area, remove the utensils and let it cool. It is a protective shutoff, not a repair message.
Information
On an electric cooktop, the entry for C82 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
When observation becomes a service request.
Leave internal testing to a technician.
Nothing responds after unlocking and a power reset.
The same F code returns after you clear the cause.
Indicator lights do not come on although the cooktop has power. Product Help has no troubleshooting for that.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Maytag electric cooktop will not turn on or heat advice. Read the manual for your own model.
- Lock - Electric and Induction Cooktop - Product Help | Maytag
- Begins with U - Electric Cooktop - Product Help | Maytag
- F4 - Electric Cooktop - Product Help | Maytag
- F8 - Electric Cooktop - Product Help | Maytag
- C82 - Electric Cooktop - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
How do I unlock a Maytag cooktop?
Touch and hold LOCK for 3 seconds. If it was locked with the power off, the surface cooking areas cannot be turned on from the touch controls until it is unlocked.
What does U mean?
No pan is detected, or Keep Warm is on, or there is a problem with the electrical power supply. Place a suitable pan or reset power.
What does F4 mean?
A pot or pan is too close to the control panel. Move it off the cooktop and wait 5 minutes.
What does F8 mean?
The surface cooking area was on too long and the automatic shutoff was activated. Turn it off, remove utensils and allow it to cool.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Lock
On an electric cooktop, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag electric cooktop beeping
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Cooktop hotplate and touch control (F12)
Maytag Product Help prints two meanings for F12 on an electric cooktop. One page points to a hotplate (cooking surface, burner or element) or its wiring. Another says there is an internal communication error on the touch control module. Both give a one-minute breaker reset.
Cooktop repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.
