Maytag cooktop U / Information

Maytag cooktop
error code U

Cooktop / display referenceU

Maytag's electric cooktop page words U like this: “U indicates there is no pan detected.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Also printed as U

Last reviewed

Cooktop / display referenceU
Meaning
Maytag's electric cooktop page words U like this: “U indicates there is no pan detected.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Who handles it
Reset, then book
Related codes
Source
Begins with U - Electric Cooktop - Product Help | Maytag

What Maytag cooktop U means.

What it means

Maytag's electric cooktop page words U like this: “U indicates there is no pan detected.” Try the one-minute breaker reset, and schedule a visit if the code returns.

What you can safely check

Power off at the breaker before any panel comes off; wiring is a technician's job.

When to call a technician

U repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop U: Close view of a glass cooktop corner with a few red lit segments and indicator dots on the touch control area, a cutting board of vegetables beside it.
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Power off at the breaker before any panel comes off; wiring is a technician's job.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Check that your appliance is an electric cooktop and copy U exactly as the display shows it.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Breaker off for one full minute, then back on, and look for U.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Once power is back, keep an eye on the cooktop for about a minute for U.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Write down the exact words or symbols the electric cooktop shows before you do anything.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Note the model and the moment U showed up; both help us plan.

Does U keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print beside U for a electric cooktop?

The electric cooktop entry for U reads “U indicates there is no pan detected.” That is the whole explanation Maytag prints.

Read the supporting manual

What do I try at home first for U?

Turn the cooktop's circuit breaker off for one minute, switch it back on, then keep an eye on the cooktop for a further minute to see whether U comes back.

Read the supporting manual

Is U the same as C82 on a electric cooktop?

C82 is a neighbor of U, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Is the electric cooktop fine to use with U on the display?

When in doubt, switch the electric cooktop off. If U keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

Begins with U - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 12016 / PH 12016 (electric cooktop)

Facts for U are from the electric cooktop table (PH 12016) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read U on my electric cooktop?

When U is on the display of an electric cooktop, Maytag's wording is “U indicates there is no pan detected.” That is the whole entry.

Should I reset the power for U?

Try it first: one minute off, one minute on screen. If U persists, a technician should look.

Does Maytag tell me what to replace for U?

Not by itself; the page stops at the line it prints.

What do you need to know about U?

The model and serial numbers, the exact display for U, and what the electric cooktop was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.