Maytag cooktop F03 / User interface

Maytag cooktop
error code F03

Cooktop / display reference

F03 on a Maytag electric cooktop is explained as “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.

Also printed as F03

Last reviewed

Cooktop / display reference
Meaning
F03 on a Maytag electric cooktop is explained as “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.
Who handles it
Reset, then book
Related codes
Source
F03 - Electric Cooktop - Product Help | Maytag

What Maytag cooktop F03 means.

What it means

F03 on a Maytag electric cooktop is explained as “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.

What you can safely check

Power off at the breaker before any panel comes off; wiring is a technician's job.

When to call a technician

F03 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop F03: Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power off at the breaker before any panel comes off; wiring is a technician's job.

  2. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record F03 character by character and note the product type: electric cooktop.

  3. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Cut power at the breaker for a minute, restore it, then check for F03.

  4. Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Once power is back, keep an eye on the cooktop for about a minute for F03.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Press each key on the electric cooktop one at a time and note any that do nothing, beep alone or stick.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact F03 wording before you call.

Does F03 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Black glass electric cooktop with a row of round touch keys and a small dim display along the front edge, set in a granite counter

Component reference

Cooktop touch control (user interface or touchpad)

The touch control is the keypad on a Maytag electric cooktop.

Read the definition

A little more context.

What should a electric cooktop owner take from F03?

Maytag's electric cooktop page gives F03 a single line: “There is an internal communication error on the touch control module .” It adds nothing about cause.

Read the supporting manual

What is worth doing before I schedule a visit for F03?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F03 returns.

Read the supporting manual

Why do F03 and U sit side by side in Maytag's list?

U is a separate entry from F03 on the electric cooktop page, with its own wording.

Read the supporting manual

Should the family keep using the electric cooktop with F03 showing?

A keypad problem is about control. If keys seem to press themselves, switch the electric cooktop off at the breaker. Never open a panel on the electric cooktop yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F03 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 11962 / PH 11962 (electric cooktop)

Facts for F03 are from the electric cooktop table (PH 11962) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What is F03 on a Maytag electric cooktop?

On the electric cooktop page the line is “There is an internal communication error on the touch control module .” No further cause is given.

Can a breaker reset fix F03?

It is the page's first step and costs nothing. A returning F03 afterward means schedule us.

Does Maytag tell me what to replace for F03?

Not by itself; the page stops at the line it prints.

What should I tell the technician about F03?

Tell us the model, the display wording and when F03 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.