Inside the appliance
Cooktop power control board (power control module). In plain English.
The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64. Product Help gives no more detail than that. The only step printed is a one-minute breaker reset, then a one-minute watch.

Where it fits.
Cooktop power control board (power control module) in the appliance
Under the cooktop surface, out of view. Product Help does not locate it.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Cooktop power control board (power control module) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.

Maytag electric cooktop beeping
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.

Maytag electric cooktop will not turn on or heat
When a Maytag electric cooktop will not turn on or heat, Product Help points to Control Lock, no pan detected, a pan too close to the controls, the automatic shutoff after long use, or the wrong cookware. Unlock it, recenter a suitable pan, wait for the shutoff to clear, and book a technician if nothing responds.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Note the exact code
F58 and F43 name the power control board or the wiring. F40, F47 and F64 add the touchpad. F64 also names the electrical supply.
- 2
Reset at the breaker
Turn the cooktop's breaker off for one minute, then on, and watch the cooktop for one minute.
- 3
Look at the supply
F64 lists the electrical supply. If other things on the circuit also misbehave, mention it when you call.
- 4
Leave the cooktop closed
Board and wiring sit under the surface. Do not lift the glass or reach into the cabinet.
- 5
Verify operation
After the reset, turn one cooking area on at low heat and confirm it responds.
Cleaning or replacement?
Leave internal testing to a technician.
The code returns after the one-minute reset.
The code appears together with dead or unresponsive cooking areas.
Other appliances on the same circuit also lose power.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Cooktop power control board (power control module) advice. Read the manual for your own model.
- F58 - Electric Cooktop - Product Help | Maytag
- F64 - Electric Cooktop - Product Help | Maytag
- F42 - Electric Cooktop - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What is the power control board on a Maytag cooktop?
It is the control part Product Help names for F40, F42, F43, F47, F58 and F64. The pages say nothing further about what it does.
Is the power control board the same as the touch control?
No. The touchpad is the keypad you press. F40, F47 and F64 name both parts, so the code alone does not say which one.
What should I do for F58?
Product Help names the power control board or the wiring for F58. Turn the breaker off for one minute, back on, and watch for one minute.
Can I replace the board myself?
We do not recommend it. The board and wiring sit under the cooktop surface on household power; book a technician.
Does the code mean the cooktop is unsafe?
Product Help does not say so. If you smell burning or see damage, leave the breaker off and book a visit.
Maytag codes, symptoms, parts and service
From the message to what you do next.
F58
For F58, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag electric cooktop beeping
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Cooktop repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.
