Before work starts
Your technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Independent appliance repair
We repair Maytag electric cooktops: a cooking area that will not heat, an overheating shutoff, a touch panel that beeps or locks, or an F code. Book a technician and we test the element, the control and the supply on site.


A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.

When a Maytag electric cooktop will not turn on or heat, Product Help points to Control Lock, no pan detected, a pan too close to the controls, the automatic shutoff after long use, or the wrong cookware. Unlock it, recenter a suitable pan, wait for the shutoff to clear, and book a technician if nothing responds.
We have linked no other researched dishwasher code to this topic. Compare the exact message with your model’s manual and do not borrow another code from the library.
See the research statusWe pick the part after we read the model label and test the unit. Nothing is ordered ahead of time, and the quote is yours to approve before any work begins.
Three steps from request to repair.
You stay in the loop the whole way.

Pick washer or dryer and tell us what it does: no spin, no heat, loud thumping. Book online any time.

The technician tests the machine and quotes the work. You approve the price before a tool comes out.

After the repair the technician runs the machine with you and explains what was changed.
Product Help prints codes that start with C, U and F, such as C82, U and F12.
C82 asks about pan size, material and an empty pan. Pan base should match the cooking area, flat and medium-to-heavy.
U means no pan is detected. It can also mean Keep Warm is on, or a power supply problem.
Switch the breaker off for 60 seconds, restore it, then keep an eye on the cooktop for a minute.
C81 or C83 says the cooktop overheated and asks for the breaker off for five minutes.
C81, C82 or F12 returns after the reset.
One cooking area stays cold.
The touch panel beeps or ignores presses.
The glass is cracked.
Arrange a diagnosticYour technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Maytag deals with repairs its warranty covers. Every repair we complete is backed by our workmanship warranty.
No pan is detected, so place a suitable pan on the cooking area. It can also show when Keep Warm is on.
The surface cooking area overheated and the automatic shutoff activated. Product Help checks pan size, an empty pot and the oven.
Electric cooktops, radiant and induction, in the types Product Help covers. Tell us your model when you book.
Maytag prints a hotplate problem on one page and a touch control communication error on another. We confirm on site.
For a unit still covered by the manufacturer's warranty, the maker takes that repair. After coverage ends, schedule a technician with us and approve the quote first.
Maytag codes, symptoms, parts and service
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Maytag Product Help prints two meanings for F12 on an electric cooktop. One page points to a hotplate (cooking surface, burner or element) or its wiring. Another says there is an internal communication error on the touch control module. Both give a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.