Maytag cooktop F42 / Power supply

Maytag cooktop
error code F42

Cooktop / display reference

Maytag lists the cooktop power control board or the wiring for F42 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.

Also printed as F42

Last reviewed

Cooktop / display reference
Meaning
Maytag lists the cooktop power control board or the wiring for F42 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
Who handles it
Reset, then book
Related codes
Source
F42 - Electric Cooktop - Product Help | Maytag

What Maytag cooktop F42 means.

What it means

Maytag lists the cooktop power control board or the wiring for F42 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.

What you can safely check

Power off at the breaker before any panel comes off; wiring is a technician's job.

When to call a technician

F42 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop F42: Underside of an electric cooktop on a workbench showing the terminal block with black, red and white wires and a green ground wire, and three screwdrivers.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power off at the breaker before any panel comes off; wiring is a technician's job.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Match the label on your appliance to the electric cooktop list before you rely on the wording for F42.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Breaker off for one full minute, then back on, and look for F42.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Run the cooktop briefly after the reset and see whether F42 comes back.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Check whether the electric cooktop still lights and answers touch while F42 shows.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Note the model and the moment F42 showed up; both help us plan.

Does F42 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Black glass electric cooktop from above with two radiant elements glowing red and two cooking areas off, on a butcher-block counter

Component reference

Cooktop power control board (power control module)

The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64.

Read the definition

A little more context.

How does the Maytag electric cooktop page explain F42?

The electric cooktop list ties F42 to the cooktop power control board or the wiring. That is a set of candidates, and the page does not pick one.

Read the supporting manual

How do I handle F42 on the electric cooktop step by step?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F42 returns.

Read the supporting manual

Why do F42 and F40 sit side by side in Maytag's list?

Maytag lists the user interface (touchpad), the cooktop power control board or the wiring against F40, while F42 gets the cooktop power control board or the wiring. They are neighbors in the electric cooktop list but separate entries.

Read the supporting manual

Is the electric cooktop fine to use with F42 on the display?

A power control problem affects what heats, so use the electric cooktop only if every area switches on and off as it should.

Read the supporting manual

The manual behind the message.

Manufacturer document

F42 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12873 / PH 12873 (electric cooktop)

Manufacturer document

F42 - Electric and Induction Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 11989 / PH 11989 (electric cooktop)

Facts for F42 are from the electric cooktop table (PH 12873) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What is F42 on a Maytag electric cooktop?

Maytag names the cooktop power control board or the wiring and gives no test to choose between them.

Is switching off the breaker enough for F42?

It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F42 returns, schedule a visit.

Does F42 point to a single part?

The list is the cooktop power control board or the wiring; testing on site settles it.

What helps most on the first visit for F42?

The model number, what F42 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.