What it means
Maytag’s F36 pages do not agree. Two say a temperature sensor on an induction coil; the radiant element page says communication between the touch control module and the electronic control. Reset at the breaker for one minute.
Maytag cooktop F36 / Sensors
Maytag’s F36 pages do not agree. Two say a temperature sensor on an induction coil; the radiant element page says communication between the touch control module and the electronic control. Reset at the breaker for one minute.
Also printed as F36
Maytag’s F36 pages do not agree. Two say a temperature sensor on an induction coil; the radiant element page says communication between the touch control module and the electronic control. Reset at the breaker for one minute.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F36 returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

Induction coil wording applies to an induction cooktop. On a radiant element cooktop the F36 page describes a communication problem instead.

Turn the surface areas off, then switch the breaker off for one minute and back on.

Watch the display for one minute before you start cooking.
Both explanations involve internal parts. Sensors and boards are not a home repair.
The F36 and F37 pages are printed together, so tell us whether you saw F36 alone or F36 with F37.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionTwo pages say there may be a problem with a temperature sensor on an induction coil. A third, titled F36 Error Code - Radiant Element Cooktop, says communication between the touch control module and the electronic control.
Read the supporting manualThe shared page is titled F36, F37 and gives both codes the same sentence and reset. The radiant page mentions only F36.
Read the supporting manualTurn off the circuit breaker or breakers for one minute, turn them on, monitor the cooktop for one minute, and verify operation. The electric and induction page adds that you may need a qualified technician.
Read the supporting manualA radiant element cooktop has no induction coil. That mismatch is one reason knowing your cooktop type matters before you read the sensor line.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12868 / PH 12868 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11986 / PH 11986 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11987 / PH 11987 (electric cooktop)
Three Maytag Product Help electric cooktop pages for F36 (PH 12868, PH 11986, PH 11987). Product Help lists no models for this entry, so the text applies to the cooktop type, not to a named model.
It depends on the page. The shared F36/F37 pages say a temperature sensor on an induction coil; the radiant page says touch control module communication.
Maytag names no replacement. It gives the power reset and, if the code returns, service.
None is printed. They share one page and one sentence.
It identifies the type of cooktop the sensor sentence is written for.
Maytag codes, symptoms, parts and service
F2E1 starts with a cleaning question on Maytag’s page: build-up on the keys may hinder the controls’ responsiveness. Clean with soap and water, dry with a microfiber towel, then reset at the breaker. The page then names the control or wiring.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.