What it means
F2 on a Maytag electric cooktop is explained as “'F2' will disappear when the surface cooking area has cooled.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag cooktop F2 / Information
F2 on a Maytag electric cooktop is explained as “'F2' will disappear when the surface cooking area has cooled.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as F2
F2 on a Maytag electric cooktop is explained as “'F2' will disappear when the surface cooking area has cooled.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F2 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the electric cooktop list before you rely on the wording for F2.

Leave the breaker off a whole minute before checking for F2 again.

Give the cooktop a minute on screen after the reset; a returning F2 means schedule a visit.
Check your model manual for what F2 means before treating it as a breakdown.
Note the model and the moment F2 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for F2 on an electric cooktop: “'F2' will disappear when the surface cooking area has cooled.”
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F2 returns.
Read the supporting manualF25 is a neighbor of the code, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhether the electric cooktop is safe depends on how it behaves, not the message alone. Never open a panel on the electric cooktop yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11984 / PH 11984 (electric cooktop)
Scope for F2: Maytag electric cooktop, PH 11984, checked November 2026. Maytag lists no models on the F2 page.
The electric cooktop page reads “'F2' will disappear when the surface cooking area has cooled.” It prints nothing more about cause.
Yes, give it the whole minute. If F2 is still there afterward, schedule a visit.
Maytag names no part here. Read the message and follow the steps.
Model and serial numbers plus a note of what happened when F2 appeared.
Maytag codes, symptoms, parts and service
F25 on a Maytag electric cooktop is explained as “There is a problem with power supply to the cooktop.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.