What it means
F25 on a Maytag electric cooktop is explained as “There is a problem with power supply to the cooktop.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag cooktop F25 / Power supply
F25 on a Maytag electric cooktop is explained as “There is a problem with power supply to the cooktop.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as F25
F25 on a Maytag electric cooktop is explained as “There is a problem with power supply to the cooktop.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F25 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

Check that your appliance is an electric cooktop and copy F25 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for F25.

Once power is back, keep an eye on the cooktop for about a minute for F25.
Make sure every control of the electric cooktop is off, then wipe the glass and touch area dry before the reset.
Keep the model number close and note when F25 appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's electric cooktop page gives F25 a single line: “There is a problem with power supply to the cooktop.” It adds nothing about cause.
Read the supporting manualTurn the cooktop's circuit breaker off for one minute, switch it back on, then keep an eye on the cooktop for a further minute to see whether F25 comes back.
Read the supporting manualF22 is a separate entry from F25 on the electric cooktop page, with its own wording.
Read the supporting manualKeep the electric cooktop off until F25 is explained if touch controls act oddly. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12862 / PH 12862 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11982 / PH 11982 (electric cooktop)
Scope for F25: Maytag electric cooktop, PH 12862, checked November 2026. Maytag lists no models on the F25 page.
The electric cooktop page reads “There is a problem with power supply to the cooktop.” It prints nothing more about cause.
Yes, give it the whole minute. If F25 is still there afterward, schedule a visit.
Not by itself; the page stops at the line it prints.
Model and serial numbers plus a note of what happened when F25 appeared.
Maytag codes, symptoms, parts and service
Maytag words F22 as “an internal communication error on the touch control module.” Reset at the breaker for one minute and watch the cooktop for one minute. The page names no part, so a code that returns needs a visit.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.