What it means
Maytag words F22 as “an internal communication error on the touch control module.” Reset at the breaker for one minute and watch the cooktop for one minute. The page names no part, so a code that returns needs a visit.
Maytag cooktop F22 / User interface
Maytag words F22 as “an internal communication error on the touch control module.” Reset at the breaker for one minute and watch the cooktop for one minute. The page names no part, so a code that returns needs a visit.
Also printed as F22
Maytag words F22 as “an internal communication error on the touch control module.” Reset at the breaker for one minute and watch the cooktop for one minute. The page names no part, so a code that returns needs a visit.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F22 returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

Confirm all surface areas are off and cool before you walk to the breaker panel.

Turn off the circuit breaker or breakers for one minute, as the page prescribes, then turn them back on.

Product Help asks you to monitor the cooktop for one minute to see whether the code comes back. Do not start cooking inside that minute.
F22 and F0E4 are printed with the same sentence about the touch control module. Write down which one you saw.
Note whether the code appeared at power-up, while touching a control, or on its own. That detail narrows a communication problem.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionThe electric cooktop page says there is an internal communication error on the touch control module, then gives the one-minute breaker reset.
Read the supporting manualF12 on the radiant element page and F0E4 print the same sentence. Taken together, three different codes lead to the same one-line explanation and the same reset.
Read the supporting manualPartly. The F36 radiant page says there may be a problem with communication between the touch control module and the electronic control. That is a link between two boards, where F22 is called internal to the touch module.
Read the supporting manualIf the code is gone after the minute, the cooktop recovered from a one-off communication hiccup. If it returns on another day, the reset is no longer enough and it is time to book a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11981 / PH 11981 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11972 / PH 11972 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11975 / PH 11975 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11987 / PH 11987 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11965 / PH 11965 (electric cooktop)
Facts come from the Maytag Product Help electric cooktop page for F22 and from the F12, F1E1, F36 and F0E4 pages. Product Help lists no models for this entry, so the text applies to the cooktop type, not to a named model.
The wording is identical. They are separate codes on separate pages, and Maytag gives no difference in the fix.
It means the touch control module reported an internal communication error. Maytag does not say the panel must be replaced.
The page does not mention cleaning. Cleaning steps appear on the stuck-key codes F1E0 and F2E1, not on F22.
Treat it as a recurring problem. Write down the dates and book a visit rather than resetting again and again.
Maytag codes, symptoms, parts and service
Maytag’s pages disagree on F21: one says “a problem with power supply frequency,” two others say the cooktop may be overheating, so verify installation and let it cool about 5 minutes. Then reset at the breaker for one minute.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.