What it means
Maytag's electric cooktop page links F1E9 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag cooktop F1E9 / Control board
Maytag's electric cooktop page links F1E9 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F1E9
Maytag's electric cooktop page links F1E9 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F1E9 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

Check that your appliance is an electric cooktop and copy F1E9 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for F1E9.

Give the cooktop a minute on screen after the reset; a returning F1E9 means schedule a visit.
Check whether the electric cooktop still lights and answers touch while F1E9 shows.
Note the model and the moment F1E9 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F1E9 is printed against the cooktop control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTake the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F1E9 stays away, the reset did its job.
Read the supporting manualMaytag gives F1E7 and F1E9 the same wording on the electric cooktop page, so the same first step fits both.
Read the supporting manualA power control problem affects what heats, so use the electric cooktop only if every area switches on and off as it should. If F1E9 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11978 / PH 11978 (electric cooktop)
F1E9 comes from Maytag Product Help (PH 11978) for the electric cooktop, read in November 2026; the F1E9 entry names no models.
F1E9 is printed against the cooktop control or the wiring; the page does not narrow it down.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F1E9 returns, schedule a visit.
The list is the cooktop control or the wiring; testing on site settles it.
Model and serial numbers plus a note of what happened when F1E9 appeared.
Maytag codes, symptoms, parts and service
Maytag's electric cooktop page links F1E7 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.