What it means
Maytag's electric cooktop page links F1E7 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag cooktop F1E7 / Control board
Maytag's electric cooktop page links F1E7 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F1E7
Maytag's electric cooktop page links F1E7 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F1E7 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

Match the label on your appliance to the electric cooktop list before you rely on the wording for F1E7.

Cut power at the breaker for a minute, restore it, then check for F1E7.

Run the cooktop briefly after the reset and see whether F1E7 comes back.
The power control board sits inside the electric cooktop and is left to a technician.
Note the model and the moment F1E7 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F1E7 is printed against the cooktop control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F1E7 returns.
Read the supporting manualThe electric cooktop list prints F1E1 next to F1E7, but with a different line. Look up the one on your display.
Read the supporting manualA power control problem affects what heats, so use the electric cooktop only if every area switches on and off as it should. If F1E7 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11977 / PH 11977 (electric cooktop)
Facts for F1E7 are from the electric cooktop table (PH 11977) of Maytag Product Help, checked November 2026; no model list is printed.
F1E7 is printed against the cooktop control or the wiring; the page does not narrow it down.
Yes, give it the whole minute. If F1E7 is still there afterward, schedule a visit.
No. the cooktop control or the wiring are all candidates and the page gives no way to choose.
Model and serial numbers plus a note of what happened when F1E7 appeared.
Maytag codes, symptoms, parts and service
On an electric cooktop, the entry for F1E1 says “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” Try the one-minute breaker reset, and schedule a visit if the code returns.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.