What it means
On an electric cooktop, the entry for F1E1 says “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag cooktop F1E1 / User interface
On an electric cooktop, the entry for F1E1 says “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as F1E1
On an electric cooktop, the entry for F1E1 says “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F1E1 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Check that your appliance is an electric cooktop and copy F1E1 exactly as the display shows it.

Leave the breaker off a whole minute before checking for F1E1 again.
Run the cooktop briefly after the reset and see whether F1E1 comes back.
Press each key on the electric cooktop one at a time and note any that do nothing, beep alone or stick.
Note the model and the moment F1E1 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionThe electric cooktop entry for F1E1 reads “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” That is the whole explanation Maytag prints.
Read the supporting manualTake the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F1E1 stays away, the reset did its job.
Read the supporting manualF1E0 is a separate entry from F1E1 on the electric cooktop page, with its own wording.
Read the supporting manualA keypad problem is about control. If keys seem to press themselves, switch the electric cooktop off at the breaker.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11975 / PH 11975 (electric cooktop)
F1E1 comes from Maytag Product Help (PH 11975) for the electric cooktop, read in November 2026; the F1E1 entry names no models.
Maytag's wording is “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” That is the whole entry.
Yes, give it the whole minute. If F1E1 is still there afterward, schedule a visit.
Not by itself; the page stops at the line it prints.
Tell us the model, the display wording and when F1E1 first showed up.
Maytag codes, symptoms, parts and service
Maytag says F1E0 means one or more keys are permanently pressed; lights may flash and tones may sound. Turn the controls off, clean the touch panel and clear it of objects, then reset at the breaker for one minute.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.