What it means
The Maytag page for F13 on a electric cooktop states “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag cooktop F13 / User interface
The Maytag page for F13 on a electric cooktop states “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as F13
The Maytag page for F13 on a electric cooktop states “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F13 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Check that your appliance is an electric cooktop and copy F13 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for F13.
Once power is back, keep an eye on the cooktop for about a minute for F13.
Do not pry at the panel; the keypad connections are bench work.
Keep the model number close and note when F13 appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionHere is what Maytag prints for F13 on an electric cooktop: “There is an internal communication error on the touch control module .”
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F13 returns.
Read the supporting manualF12 is a separate entry from F13 on the electric cooktop page, with its own wording.
Read the supporting manualA keypad problem is about control. If keys seem to press themselves, switch the electric cooktop off at the breaker. If F13 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11973 / PH 11973 (electric cooktop)
Facts for F13 are from the electric cooktop table (PH 11973) of Maytag Product Help, checked November 2026; no model list is printed.
On the electric cooktop page the line is “There is an internal communication error on the touch control module .” No further cause is given.
Yes, give it the whole minute. If F13 is still there afterward, schedule a visit.
Maytag names no part here. Read the message and follow the steps.
Model and serial numbers plus a note of what happened when F13 appeared.
Maytag codes, symptoms, parts and service
F12 on an electric cooktop means Maytag suspects the hotplate (cooking surface/burner/element) or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.