Maytag cooktop F12 / Heating

Maytag cooktop
error code F12

Cooktop / display reference

F12 on an electric cooktop means Maytag suspects the hotplate (cooking surface/burner/element) or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Also printed as F12

Last reviewed

Cooktop / display reference
Meaning
F12 on an electric cooktop means Maytag suspects the hotplate (cooking surface/burner/element) or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Who handles it
Reset, then book
Related codes
Source
F12 - Electric Cooktop - Product Help | Maytag

What Maytag cooktop F12 means.

What it means

F12 on an electric cooktop means Maytag suspects the hotplate (cooking surface/burner/element) or the wiring. Begin with the reset; if the code is back afterward, book a technician.

What you can safely check

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

When to call a technician

F12 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop F12: Stainless saucepan of water on a glass cooktop zone glowing orange-red, the other zones dark, a row of touch controls along the front edge.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Record F12 character by character and note the product type: electric cooktop.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Cut power at the breaker for a minute, restore it, then check for F12.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Give the cooktop a minute on screen after the reset; a returning F12 means schedule a visit.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Make sure pans sit flat and centered on the electric cooktop.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Write down the model and serial numbers and the exact F12 wording before you call.

Does F12 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop element.

Conceptual Cooktop sectionCooking zoneTemperature sensorPower boardTouch control1234
  1. 1Cooking zone
  2. 2Temperature sensor

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Black glass electric cooktop with one radiant ring glowing red and a row of touch control circles below

Component reference

Cooktop hotplate and touch control (F12)

Maytag Product Help prints two meanings for F12 on an electric cooktop.

Read the definition

A little more context.

What should a electric cooktop owner take from F12?

A electric cooktop showing F12 is, per Maytag, dealing with a possible problem in the hotplate (cooking surface/burner/element) or the wiring. The page adds no diagnosis.

Read the supporting manual

How should I react the moment F12 appears?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F12 returns.

Read the supporting manual

How far apart are F12 and F0?

The electric cooktop list prints F0 next to F12, but with a different line. Look up the one on your display.

Read the supporting manual

Is the electric cooktop fine to use with F12 on the display?

Use only the cooking areas that behave and leave the named one alone. If F12 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F12 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 11971 / PH 11971 (electric cooktop)

Manufacturer document

F12 - Radiant element - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 11972 / PH 11972 (electric cooktop)

Manufacturer document

F12 - Radiant element-Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12855 / PH 12855 (electric cooktop)

Facts for F12 are from the electric cooktop table (PH 11971) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F12 mean for a electric cooktop?

The electric cooktop page ties F12 to the hotplate (cooking surface/burner/element) or the wiring without saying which has failed.

Is switching off the breaker enough for F12?

It is the page's first step and costs nothing. A returning F12 afterward means schedule us.

Which parts does Maytag blame for F12?

No. the hotplate (cooking surface/burner/element) or the wiring are all candidates and the page gives no way to choose.

What should I tell the technician about F12?

Tell us the model, the display wording and when F12 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.