What it means
The Maytag page for F0 on a electric cooktop states “An object, liquids, or soils are putting pressure on the control panel.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag cooktop F0 / User interface
The Maytag page for F0 on a electric cooktop states “An object, liquids, or soils are putting pressure on the control panel.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as F0
The Maytag page for F0 on a electric cooktop states “An object, liquids, or soils are putting pressure on the control panel.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F0 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

Record F0 character by character and note the product type: electric cooktop.

Breaker off for one full minute, then back on, and look for F0.
Once power is back, keep an eye on the cooktop for about a minute for F0.
Ask yourself whether a power cut, storm or cleaning cycle came just before F0.
Keep the model number close and note when F0 appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F0 is covered by this wording on the electric cooktop page: “An object, liquids, or soils are putting pressure on the control panel.”
Read the supporting manualTake the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F0 stays away, the reset did its job.
Read the supporting manualF0E4 is a separate entry from the code on the electric cooktop page, with its own wording.
Read the supporting manualA control problem can stop heating or cause odd behavior, so stay near the electric cooktop while it runs. If F0 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12849 / PH 12849 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11970 / PH 11970 (electric cooktop)
F0 comes from Maytag Product Help (PH 12849) for the electric cooktop, read in November 2026; the F0 entry names no models.
Maytag's wording is “An object, liquids, or soils are putting pressure on the control panel.” That is the whole entry.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F0 returns, schedule a visit.
No part is named for F0; the page gives only the wording above.
The model and serial numbers, the exact display for F0, and what the electric cooktop was doing at the time.
Maytag codes, symptoms, parts and service
Maytag prints F0E4 as “an internal communication error on the touch control module.” Turn the breaker off for one minute, back on, and watch the cooktop for one minute. Book a visit if the code comes back.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.