What it means
Maytag prints F0E4 as “an internal communication error on the touch control module.” Turn the breaker off for one minute, back on, and watch the cooktop for one minute. Book a visit if the code comes back.
Maytag cooktop F0E4 / User interface
Maytag prints F0E4 as “an internal communication error on the touch control module.” Turn the breaker off for one minute, back on, and watch the cooktop for one minute. Book a visit if the code comes back.
Also printed as F0E4
Maytag prints F0E4 as “an internal communication error on the touch control module.” Turn the breaker off for one minute, back on, and watch the cooktop for one minute. Book a visit if the code comes back.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F0E4 returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

Make sure all surface areas are off and cool before you go to the breaker panel. The code is about the touch control module, so nothing on the glass needs to stay on.

Product Help words the reset as turning off the circuit breaker or breakers for one minute, then turning them back on. A quick flick is shorter than the wait it describes.

The page asks you to monitor the cooktop for one minute to see whether the code displays again. Touch a control only after that minute.
Zero versus the letter O matters here. F0E4 has a zero; write down exactly what the display shows before you rely on this page.
The rating label gives the model and serial number. Product Help names no models for this entry, so the label is how a technician matches your cooktop.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionProduct Help prints one cause for F0E4: an internal communication error on the touch control module. No part is named and no test is described.
Read the supporting manualThe F12 page for the radiant element prints the same sentence about the touch control module, with a note that you may need a qualified technician. The F22 page for the electric cooktop repeats it as well.
Read the supporting manualSwitch off every surface area and let the glass cool. Then use the breaker, not the touch controls, to cut power; the touch module is the part the message is about.
Read the supporting manualMaytag does not say. Because the message concerns the control module that switches the elements, do not rely on the cooktop until the code stays away after the reset.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11965 / PH 11965 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11972 / PH 11972 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11975 / PH 11975 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11981 / PH 11981 (electric cooktop)
Facts come from the Maytag Product Help electric cooktop pages for F0E4 (PH 11965), F12 and F1E1. Product Help lists no models for this entry, so the text applies to the cooktop type, not to a named model.
Not according to the page. It names the touch control module, the part that reads your touches, and says nothing about an element.
One minute, according to Product Help. After switching back on, watch the cooktop for one more minute.
No. F0E4 is an internal communication error on the touch control module. F1E1 is a loss of communication between the keypad and the appliance manager.
The page treats a clean minute as success. If the code returns on a later day, write down when it appeared and book a visit.
The model and serial number, the exact code, and whether the reset cleared it even for a short while.
Maytag codes, symptoms, parts and service
F03 on a Maytag electric cooktop is explained as “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.