What it means
Maytag’s pages disagree on F21: one says “a problem with power supply frequency,” two others say the cooktop may be overheating, so verify installation and let it cool about 5 minutes. Then reset at the breaker for one minute.
Maytag cooktop F21 / Heating
Maytag’s pages disagree on F21: one says “a problem with power supply frequency,” two others say the cooktop may be overheating, so verify installation and let it cool about 5 minutes. Then reset at the breaker for one minute.
Also printed as F21
Maytag’s pages disagree on F21: one says “a problem with power supply frequency,” two others say the cooktop may be overheating, so verify installation and let it cool about 5 minutes. Then reset at the breaker for one minute.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F21 returns after the cool-down and the breaker reset.
Your Maytag to-do list, saved here on this device

The radiant pages say to allow it to cool approximately 5 minutes. Switch the surfaces off and keep pans off the glass meanwhile.

The same pages say to verify installation. The page does not say what to verify; look at how the unit sits and what is around it, and leave wiring and supply checks to a technician.

Turn off the circuit breaker or breakers for one minute, then turn them on.

Watch for the code for one minute after restoring power. The electric-cooktop page words this as monitoring “the oven,” which is how it is printed.
Tell us whether your cooktop is radiant, induction or a plain electric model. That decides which of the two printed explanations is closer.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The electric cooktop page says “There is a problem with power supply frequency.” The radiant electric page and the radiant electric-and-induction page say “There may be a problem with the Cooktop over heating, verify installation, allow to cool approximately 5 minutes.”
Read the supporting manualAll three give the same reset: breaker off for one minute, on again, then monitor for one minute and verify operation. Only the overheating wording adds the five-minute cool-down and the installation check.
Read the supporting manualF25 reads “There is a problem with power supply to the cooktop” and ends with “If the issue reoccurs contact a qualified electrician.” F21 is framed as frequency or overheating and ends with scheduling service.
Read the supporting manualThe electric-cooktop page tells you to monitor and verify “oven” operation on a cooktop. The reset is unaffected, but the odd wording is one more reason to read all three pages side by side.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11979 / PH 11979 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12852 / PH 12852 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11980 / PH 11980 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12862 / PH 12862 (electric cooktop)
Three Maytag Product Help electric cooktop pages for F21 (PH 11979, PH 12852, PH 11980) plus the F25 page. Product Help lists no models for this entry, so the text applies to the cooktop type, not to a named model.
Two of three Maytag pages say it may be overheating. The third says a power supply frequency problem. Let it cool five minutes, then reset.
The page does not elaborate. Look at how the unit sits and what surrounds it; wiring and supply checks are for a technician.
One page says power supply frequency. Maytag does not tell you to test the supply yourself; reset, and if it returns, book a visit.
Approximately 5 minutes on the radiant pages. The breaker reset is separate and takes one minute.
The radiant electric-and-induction page prints the overheating wording and the same reset.
Maytag codes, symptoms, parts and service
Maytag's electric cooktop page links F1E9 to the cooktop control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.