What it means
F37 shares a page with F36 on Maytag Product Help: there may be a problem with a temperature sensor on an induction coil. Reset at the breaker for one minute; if F37 returns, schedule a technician.
Maytag cooktop F37 / Sensors
F37 shares a page with F36 on Maytag Product Help: there may be a problem with a temperature sensor on an induction coil. Reset at the breaker for one minute; if F37 returns, schedule a technician.
Also printed as F37
F37 shares a page with F36 on Maytag Product Help: there may be a problem with a temperature sensor on an induction coil. Reset at the breaker for one minute; if F37 returns, schedule a technician.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F37 returns after the one-minute breaker reset.
Your Maytag to-do list, saved here on this device

The sensor line is written for an induction coil. If you have a radiant element cooktop, tell us so we match it to the right page.

Switch the surface areas off and the breaker off for one minute, then restore power.

The page asks you to watch the cooktop for one minute after power returns.
A temperature sensor on a coil sits inside the cooktop; do not lift the glass or touch the coils.
The two codes share one page, so report whether F37 showed alone or after F36.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The page titled F36, F37 says there may be a problem with a temperature sensor on an induction coil, followed by the one-minute breaker reset.
Read the supporting manualNot in the pages we have. The radiant element page is titled F36 only and words F36 as a communication problem; it never mentions F37.
Read the supporting manualNo difference is printed. The same sentence covers both. Maytag does not say whether the sensor is on the same coil.
Read the supporting manualIt repeats the reset and adds that you may need assistance from a qualified technician.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12868 / PH 12868 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11986 / PH 11986 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 11987 / PH 11987 (electric cooktop)
Maytag Product Help electric cooktop pages PH 12868 and PH 11986 for F36 and F37, plus the F36 radiant page. Product Help lists no models for this entry, so the text applies to the cooktop type, not to a named model.
The page words it as a temperature sensor on an induction coil, so yes for induction cooktops.
Maytag gives no home repair for it. The page ends with the reset and service.
They share a page, so a technician will ask which of the two you saw first.
The breaker reset: off for one minute, on, then one minute of watching.
Maytag codes, symptoms, parts and service
F2E1 starts with a cleaning question on Maytag’s page: build-up on the keys may hinder the controls’ responsiveness. Clean with soap and water, dry with a microfiber towel, then reset at the breaker. The page then names the control or wiring.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.