What it means
For F43, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag cooktop F43 / Power supply
For F43, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as F43
For F43, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F43 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Record F43 character by character and note the product type: electric cooktop.

Cut power at the breaker for a minute, restore it, then check for F43.

Once power is back, keep an eye on the cooktop for about a minute for F43.
Check whether the electric cooktop still lights and answers touch while F43 shows.
Note the model and the moment F43 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64.
Read the definitionThe electric cooktop list ties F43 to the cooktop power control board or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F43 returns.
Read the supporting manualF42 and F43 name the same suspects in the electric cooktop list; quote the code you actually see when booking.
Read the supporting manualKeep the electric cooktop off until F43 is explained if touch controls act oddly. Never open a panel on the electric cooktop yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12854 / PH 12854 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11990 / PH 11990 (electric cooktop)
F43 comes from Maytag Product Help (PH 12854) for the electric cooktop, read in November 2026; the F43 entry names no models.
Maytag lists the cooktop power control board or the wiring. It is a possible-cause list, not a confirmed failure.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F43 returns, schedule a visit.
Not from the code alone: the entry lists the cooktop power control board or the wiring and stops.
Tell us the model, the display wording and when F43 first showed up.
Maytag codes, symptoms, parts and service
Maytag lists the cooktop power control board or the wiring for F42 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64. Product Help gives no more detail than that. The only step printed is a one-minute breaker reset, then a one-minute watch.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.