What it means
For F58, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag cooktop F58 / Power supply
For F58, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as F58
For F58, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F58 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the electric cooktop list before you rely on the wording for F58.

Breaker off for one full minute, then back on, and look for F58.

Give the cooktop a minute on screen after the reset; a returning F58 means schedule a visit.
Make sure every control of the electric cooktop is off, then wipe the glass and touch area dry before the reset.
Note the model and the moment F58 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64.
Read the definitionFor F58 the electric cooktop entry names the cooktop power control board or the wiring. Nothing in it says which of them has failed.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether F58 returns.
Read the supporting manualRead the exact display: F56 means the user interface (touchpad) or the wiring on the electric cooktop page, and F58 means the cooktop power control board or the wiring.
Read the supporting manualA power control problem affects what heats, so use the electric cooktop only if every area switches on and off as it should. Never open a panel on the electric cooktop yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12853 / PH 12853 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11994 / PH 11994 (electric cooktop)
Facts for F58 are from the electric cooktop table (PH 12853) of Maytag Product Help, checked November 2026; no model list is printed.
The electric cooktop page ties F58 to the cooktop power control board or the wiring without saying which has failed.
It is the page's first step and costs nothing. A returning F58 afterward means schedule us.
No. the cooktop power control board or the wiring are all candidates and the page gives no way to choose.
Tell us the model, the display wording and when F58 first showed up.
Maytag codes, symptoms, parts and service
Maytag's electric cooktop page links F56 to the user interface (touchpad) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64. Product Help gives no more detail than that. The only step printed is a one-minute breaker reset, then a one-minute watch.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.